World Library  
Flag as Inappropriate
Email this Article

Source Four

Article Id: WHEBN0005911210
Reproduction Date:

Title: Source Four  
Author: World Heritage Encyclopedia
Language: English
Subject: Stage lighting instrument, Source Four PAR, Stage lighting accessories, Electronic Theatre Controls, WikiProject Entertainment Technology
Collection: Stage Lighting Instruments
Publisher: World Heritage Encyclopedia

Source Four

Source Four ERS

The professional theaters across the globe.[7][8]


  • Glass reflector 1
  • Lamp adjustment 2
  • HPL lamp 3
  • HID version 4
  • LED version 5
  • Barrel 6
  • Enhanced definition lens tube 7
  • Third party offerings 8
  • Other Source Four products 9
  • References 10

Glass reflector

The Source Four is the first ERS to use a faceted borosilicate reflector behind the lamp[5][8] . Nearly all stage lights have some form of reflector positioned behind the lamp to reflect otherwise wasted light out of the front of the instrument. The Source Four's reflector is dichroic, meaning that it reflects light of only certain wavelengths. The Source Four's reflector reflects back 95% of the visible light striking it, while allowing over 90% of the infrared radiation (heat) to pass out the back of the instrument.[5][6] This produces a much cooler light which is less destructive to gobos or color gels at the front of the fixture,[5] and reduces localized heating of the lighting target.

A diagram showing all the parts of a Source Four.

Lamp adjustment

Lamp adjustment, or bench focus, is used to achieve an even field of light, and to remove hot-spots which can destroy color filters. On the Source Four, adjustment can be done without tools, and is more accurate than previous instruments, compared to the four-screw assembly. With this assembly it is often difficult for lamps to maintain alignment. The most common problem is the lamp dropping too low in the reflector, causing a hot spot at the bottom of the beam, and a dark area at the top. This may be corrected by a realignment of the lamp.

There are two adjustments that can be made to the cap.

1. The center screw controls the depth of the lamp into the reflector. Loosening this screw causes a spring to push the lamp further inside the reflector, creating a brighter hot spot in the beam. Tightening this screw will draw the lamp backwards, for a flatter field.

2. The wider wing nut that sits underneath the center screw controls the placement of the lamp within the reflector. Loosening this wing nut will free the lamp assembly from the cap housing. The user can then push the entire adjustment screw and lamp holder up, down, left or right to center the hot spot in the beam. It is this adjustment that most commonly needs to be made with lights that haven't been regularly serviced. Sometimes it is helpful to use a screwdriver or wrench or other thin tool to reach between the body of the light and the cap to push up on the lamp holder assembly and hold it in place while you tighten the wing nut back down.

HPL lamp

The proprietary HPL (High Performance Lamp) lamp uses a compact filament, which concentrates the most light where it is efficient in an ellipsoidal reflector.[8] At 575 watts, the HPL lamp in a Source Four produces light equivalent to a 1000 watt spotlight using previous technology. This lower energy consumption saves electricity and creates less heat. The HPL lamp also gives the fixture its name. The lamp (light source) has four filament strands, hence Source Four. It is also available in 375 W and 750 W versions, at a variety of rated supply voltages. HPL lamps are also available in longer life versions that reduce the color temperature from 3250 K to 3050 K to give the lamp a life of around 1500–2000 hours as opposed to the 300-400 hour life of the standard HPL.[9]

HID version

ETC also manufactures an HID (high-intensity discharge) Source Four body with a metal-halide lamp. The fixture has a small box attached to the yoke of the fixture which contains the ballast and other additional control gear required to strike and operate an HID lamp. HID lamps are not dimmable. The HID fixture uses less energy than the standard HPL lamp.

LED version

ETC announced in 2012 a range of Source Four bodies using LEDs, including a model specified as being a direct replacement (in terms of light output) for the HPL tungsten Source Four. The shutter barrel and lens tubes are interchangeable with the HID and tungsten versions of the Source Four. Control of parameters such as colour and light intensity is available via DMX. The power usage is approximately 25% of that of the equivalent tungsten version, although the purchase cost is significantly higher. Bulb life is significantly higher at 50,000 hours to 70% intensity.[10][11]


A Source Four with a 10 degree lens on the front (left)

The Source Four is the first fixture to feature a rotating shutter barrel,[8] which makes framing objects much easier regardless of lamp orientation. In previous fixtures, the shutters had only a limited range of motion and could not be rotated. The shutters are also made from stainless steel, which does not warp easily under the heat of the lamp. The shutters are arranged in 3 planes, allowing a degree of freedom in shutter placement by the extreme angles they can be racked to. The top and bottom shutters are on their own plane, with the 2 side shutters sharing a single plane. Occasionally with difficult shots and extreme shutter angles this sometimes causes the side shutters to hit each other, preventing a perfect focus. One option is to rotate the shutter assembly and try to achieve the same effect with different shutters. A more extreme work around is to remove the shutter assembly from the unit body and reattach it 90° offset, so that the bottom and top shutters effectively become the side shutters.

ETC also offers a variety of interchangeable lens tubes with various field angles. These are: 90, 70, 50, 36, 26, 19, 14, 10, and 5 degree lens tubes, some of which are available as enhanced definition lens tubes (EDLT). The Source Four is also available as a zoom fixture, with a non-interchangeable lens tube. According to ETC's manual, the lenses in each lens tube cannot be reoriented, added or removed. Lenses come from the factory with a painted-on dot denoting the front face. The inside of the lens tube shows which slot is for which lens.

Different field angles are needed for different venues with different catwalk and electric systems[8] (and, therefore, different throws). A lens tube with a smaller field angle will light an area from far away, whereas a large beam degree such as a 90 degree can be much closer in order to light the same area. A 90 degree Source Four might be used to project a gobo from the rear only 5 feet away on a scrim at the back of the stage, while a 10 degree could be used in the back of the house, for example, in the technical booth where a technician could access it to refocus or change gobos during a show. A zoom gives the option of adjusting the field angle within a specified range without changing the lens tube. This is needed in the case of lighting fixtures that need to be re-focused frequently to different areas of the performing area, without having to rehang them in a different position in the lighting rig. There are two Source Four Zoom fixtures, the 15-30 degree and the 25-50 degree.

Enhanced definition lens tube

In November 2005, ETC released the Enhanced Definition Lens Tube (EDLT). The EDLT is designed to produce images from gobos and other focus-critical instrument accessories more clearly and accurately than with the standard lens barrels. The lenses in the tube are coated with an anti-reflective material and are machined to more exact standards than the standard Source Four lens. The EDLT also increases lumen output. It is available in 19, 26, 36 and 50 degree barrels.

Third party offerings

Although the Source Four is designed to accept the same types of accessories as other lighting instruments, when launched in 1992 the smaller lens and barrel size required accessories that fit in a 6.25" holder rather than the 7.5" that was the standard for Lekos at the time. Many third party manufacturers have designed products specifically for the Source Four.

Ocean Thin Films, a manufacturer of scientific optics and instruments, offers the SeaChanger Color Engine that utilizes gradient dichroic disks to control color. The unit is mounted in between the lamp assembly and optics and is controlled via DMX512.[12]

Great American Market (GAM) offers a special effects unit, the SX4,[13] that is mounted inside a Source Four in a similar manner to the Seachanger Color Engine and offers a large selection of drop-in accessories that range from gobo-changers to overlapping looping gobos. Several manufacturers of HMI sources, such as Kobold, provide lighting fixtures that provide "daylight balanced" light through the Source 4 without the use of gels. This is accomplished by replacing the lamp assembly on the back of the Source 4 with an HMI lamp head.

Other Source Four products

In 1995, ETC introduced the Source Four PAR which is meant to replicate the performance of PAR cans while lessening the disadvantages involved with traditional PAR cans.

In 1999, ETC introduced the Source Four PARNel as an alternative to Fresnel lanterns.

In 2002, ETC introduced the Source Four MultiPAR as an alternative to striplights.

In 2004, ETC introduced the Source Four Revolution, ETC's first moving fixture. The Revolution was awarded both the EDDY and ABTT awards.[14] The Revolution has the same filament structure as famous HPL Source Four lamp, as opposed to most other moving lights, which use arc lamps. Also, the Revolution uses a gel string color scroller instead of the typical color wheel, thus allowing lighting designers to use familiar gel choices.

In 2011, ETC introduced the Source Four Fresnel. A fresnel style light that maintains lamp capability with the HPL Source Four lamp.


  1. ^ Lampert-Gréaux, Ellen (2010), "David Cunningham: 2010 Wally Winner", Live Design 
  2. ^ US patent RE36316E, David W. Cunningham, "INCANDESCENT ILLUMINATION SYSTEM", issued 1999-September-28 
  3. ^ US patent 5345371, David W. Cunningham, Gregory F. Esakoff, "LIGHTING FIXTURE", issued 1994-September-6 
  4. ^ US patent 5544029, David W. Cunningham, "LIGHTING FIXTURE FOR THEATER, TELEVISION AND ARCHITECTURAL APPLICATIONS", issued 1996-August-6 
  5. ^ a b c d Gillette, J. Michael (November 10, 2004). Theatrical Design and Production: An Introduction to Scene Design and Construction, Lighting, Sound, Costume, and Makeup.  
  6. ^ a b "Source Four".  
  7. ^ Daley, Dan (February 2008). "Incandescent's Not-So-Dim Future". Projection Lights and Staging News (PLSN) 09 (1) (Timeless Communications Corp.). p. 46. 
  8. ^ a b c d e ETC | Explore the Source Four | Main
  9. ^
  10. ^
  11. ^
  12. ^ SeaChanger Online - The Brilliant Color Engine
  13. ^
  14. ^ "2004 Awards Presented at ABTT in London". Live Design. July 2004. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.