Scouring pad


A scouring pad or scourer is a small pad of metal or plastic mesh used for scouring a surface. Some scouring pads have one side made of a soft sponge-like material and the other is the aforementioned plastic mesh.

History

The scouring pad has been reincarnated in several forms over the years. In 1928, R. B. Kingman patented the scouring ball, which was one of the first scouring pads made of a metal mesh.[1]

In 1942, David J. Kelman patented a toroidal metal scouring pad. This was, and still is, used as an abrasive scrubbing pad, however, it is becoming less common, as it removes non-stick surfaces off pans.[1]

In 1988, the first scouring pad made of out sponge material was patented by Hans J. Hartmann. This enabled the scouring pad to float. To achieve this, he used a technique to thread the metal mesh through the sponge and wrap it around the outside. This was meant to stop the scouring pad from dropping to the bottom of the sink.[1]

In 1973, the plastic needle surface (now more commonly used) was invented by Edward Mednick, who invented the new surface as a way of reducing the damage scouring pads did to non-stick surfaces. This technology and varieties thereon are what most scouring pads sold today are based upon.[1]

Use

Correctly using a scouring pad can be a very hard task. Their abrasive nature and the repeated up and down scrubbing motion can cause wrist ache or even skin irritation. It is generally accepted that the larger the pad, the more satisfying the cleaning, however the most commonly available scouring pads are small. Using scouring pads on non-stick surfaces such as Teflon is not advisable as they may strip away the coating. It is advisable to use protective equipment such as rubber gloves when using scouring pads as this is known to prevent (or at least hide) any irritation caused by use.

References

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.