World Library  
Flag as Inappropriate
Email this Article

Base load power plant

Article Id: WHEBN0001867804
Reproduction Date:

Title: Base load power plant  
Author: World Heritage Encyclopedia
Language: English
Subject: Intermittent energy source, Power station, Load management, Load following power plant, Dynamic demand (electric power)
Collection: Power Station Technology
Publisher: World Heritage Encyclopedia

Base load power plant

Base load power sources are power stations which can consistently generate the electrical power needed to satisfy minimum demand. That demand is called the base load requirement, it is the minimum level of demand on an electrical grid over 24 hours.

Historically, large power grids have used base load power plants exclusively. However, there is no specific technical requirement for this to be so. The base load requirement can equally well be met by the appropriate quantity of intermittent power sources and peaking power plants.


  • Description 1
  • Economics 2
  • Base load power plant usage 3
  • See also 4
  • References 5
  • External links 6


A base load power station in Taiwan.

Baseload plant, (also baseload power plant or base load power station) is an energy station devoted to the production of base load supply. Baseload plants are the production facilities used to meet some or all of a given region's continuous energy demand, and produce energy at a constant rate, usually at a low cost relative to other production facilities available to the system.[1] Examples of baseload plants using nonrenewable fuels include nuclear and coal-fired plants. Baseload plants typically run at all times through the year except in the case of repairs or scheduled maintenance. These plants are often designed for relatively high efficiency, and may be combined cycle plants, but may take several days to start up and shut down.[2]

Each baseload power plant on a grid is allotted a specific amount of the baseload power demand to handle. The base load power is determined by the load duration curve of the system. For a typical power system, the rule of thumb is that the base load power is usually 35-40% of the maximum load during the year.

Peaks or spikes in customer power demand are frequently handled by smaller and more responsive, but perhaps somewhat less efficient types of power plants called peaking power plants, often powered with gas turbines.

While historically large power grids have had base load power plant to exclusively meet the base load, there is no specific technical requirement for this to be so. The base load can equally well be met by the appropriate quantity of intermittent power sources and peaking power plant.[3][4]

Among the renewable energy sources, hydroelectric, geothermal,[5] biogas, biomass, solar thermal with storage and ocean thermal energy conversion can provide base load power. A significant fraction of the average wind power production is available with 95% or greater probability, and so may be used for baseload power.

Hydroelectric power also has the desirable attribute of dispatchability, but conversely a hydroelectric plant may run low on its "fuel" (water at the reservoir elevation) if a long drought occurs over its drainage basin.


Power plants are designated baseload based on their low cost generation, efficiency and safety at rated output power levels. Baseload power plants do not change production to match power consumption demands since it is more economical to operate them at constant production levels. Use of higher cost combined-cycle plants or combustion turbines is thus minimized, and these plants can be cycled up and down to match more rapid fluctuations in consumption. Baseload generators, such as nuclear and coal, often have very high fixed costs, high plant load factor but very low marginal costs. On the other hand, peak load generators, such as natural gas, have low fixed costs, low plant load factor and high marginal costs.[6] Typically baseload plants are large and provide a majority of the power used by a grid. Thus, they are more effective when used continuously to cover the power baseload required by the grid.

Base load power plant usage

Nuclear power plants may take many hours, if not days, to change their power output,[7] although modern stations, and those in France, can and do operate as load following power plants and alter their output to meet varying demands.[8] Nuclear and coal power plants have low fuel costs.[9] Because they require a long period of time to heat up to operating temperature, these plants typically handle large amounts of baseload demand. Different plants and technologies may have differing capacities to increase or decrease output on demand: nuclear plants are generally run at close to maximum output continuously (apart from maintenance, refueling and periodic refurbishment), while coal-fired plants may be cycled over the course of a day to meet demand. Plants with multiple generating units may be used as a group to improve the "fit" with demand, by operating each unit as close to peak efficiency as possible.

See also


  1. ^ "Energy Dictionary - Baseload plant". Retrieved 2008-08-03. 
  2. ^ ZDNet Why baseload power is doomed
  3. ^
  4. ^
  5. ^ "Scaling Geothermal for Reliable Baseload Power". 2007-10-05. Retrieved 2008-08-03. 
  6. ^ Ronald J. Daniels (1996). Ontario Hydro at the Millennium: Has Monopoly's Moment Passed?. Montreal and Kingston: McGill-Queen's University Press. Retrieved 2008-08-03. 
  7. ^
  8. ^ Nuclear Development, June 2011, page 10 from
  9. ^

External links

  • Base Load Power Plants - Fundamentals of Electricity - Broken
  • Levelized Costs of Electricity Production by Technology
  • The Energy Resources and Economics Workbook (.doc)
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.