In a real spring–mass system, the spring has a nonnegligible mass m. Since not all of the spring's length moves at the same velocity u as the suspended mass M, its kinetic energy is not equal to m u^2 /2. As such, m cannot be simply added to M to determine the frequency of oscillation, and the effective mass of the spring is defined as the mass that needs to be added to M to correctly predict the behavior of the system.
Ideal uniform spring
vertical springmass system
The effective mass of the spring in a springmass system when using an ideal spring of uniform linear density is 1/3 of the mass of the spring and is independent of the direction of the springmass system (i.e., horizontal, vertical, and oblique systems all have the same effective mass). This is because external acceleration does not affect the period of motion around the equilibrium point.
We can find the effective mass of the spring by finding its kinetic energy. This requires adding all the length elements' kinetic energy, and requires the following integral:

T =\int_m\frac{1}{2}u^2\,dm
Since the spring is uniform, dm=\left(\frac{dy}{L}\right)m, where L is the length of the spring. Hence,

T = \int_0^L\frac{1}{2}u^2\left(\frac{dy}{L}\right)m\!

=\frac{1}{2}\frac{m}{L}\int_0^L u^2\,dy
The velocity of each mass element of the spring is directly proportional to its length, i.e. u=\frac{vy}{L}, from which it follows:

T =\frac{1}{2}\frac{m}{L}\int_0^L\left(\frac{vy}{L}\right)^2\,dy

=\frac{1}{2}\frac{m}{L^3}v^2\int_0^L y^2\,dy

=\frac{1}{2}\frac{m}{L^3}v^2\left[\frac{y^3}{3}\right]_0^L

=\frac{1}{2}\frac{m}{3}v^2
Comparing to the expected original kinetic energy formula \frac{1}{2}mv^2, we can conclude that effective mass of spring in this case is m/3. Using this result, we can write down the equation of motion of the spring by writing the Lagrangian in terms of the displacement x from the spring's unstretched position (ignoring constant potential terms and taking the upwards direction as positive):

L = T  V

= \frac{1}{2}\frac{m}{3}\dot{x}^2 + \frac{1}{2}M v^2  \frac{1}{2} k x^2  \frac{m g x}{2}  M g x
Note that g here is the acceleration of gravity along the spring. Using the Euler–Lagrange equation, we arrive at the equation of motion:

\left( \frac{m}{3}+M \right) \ddot{x} = kx  \frac{mg}{2}  Mg
We can find the equilibrium point x_{\mathrm{eq}} by letting the acceleration be zero:

x_{\mathrm{eq}} = \frac{1}{k}\left( \frac{mg}{2} + Mg \right)
Defining \bar{x} = x  x_{\mathrm{eq}} , the equation of motion becomes:

\left( \frac{m}{3}+M \right) \ddot{\bar{x}} = k\bar{x}
This is the equation for a simple harmonic oscillator with period:

\tau = 2 \pi \left( \frac{M + m/3}{k} \right)^{1/2}
So we can see that the effective mass of the spring added to the mass of the load gives us the "effective total mass" of the system that must be used in the standard formula 2 \pi \left( \frac{m}{k} \right)^{1/2} to determine the period of oscillation.
General case
As seen above, the effective mass of a spring does not depend upon "external" factors such as the acceleration of gravity along it. In fact, for a nonuniform spring, the effective mass solely depends on its linear density \rho(x) along its length:


T = \int_m\frac{1}{2}u^2\,dm

= \int_{0}^L\frac{1}{2}u^2 \rho(x) \,dx

= \int_{0}^L\frac{1}{2}\left(\frac{v x}{L} \right)^2 \rho(x) \,dx

= \frac{1}{2} \left[ \int_{0}^L \frac{x^2}{L^2} \rho(x) \,dx \right] v^2
So the effective mass of a spring is:

m_{\mathrm{eff}} = \int_{0}^L \frac{x^2}{L^2} \rho(x) \,dx
This result also shows that m_{\mathrm{eff}} \le m, with m_{\mathrm{eff}} = m occurring in the case of an unphysical spring whose mass is located purely at the end farthest from the support.
Real spring
The above calculations assume that the stiffness coefficient of the spring does not depend on its length. However, this is not the case for real springs. For small values of M/m, the displacement is not so large as to cause elastic deformation. Junichi Ueda and Yoshiro Sadamoto have found that as M/m increases beyond 7, the effective mass of a spring in a vertical springmass system becomes smaller than Rayleigh's value m/3 and eventually reaches negative values. This unexpected behavior of the effective mass can be explained in terms of the elastic aftereffect (which is the spring's not returning to its original length after the load is removed).
See also
External links

http://tw.knowledge.yahoo.com/question/question?qid=1405121418180

http://tw.knowledge.yahoo.com/question/question?qid=1509031308350

http://hk.knowledge.yahoo.com/question/article?qid=6908120700201

http://www.goiit.com/posts/list/mechanicseffectivemassofspring40942.htm

http://www.juen.ac.jp/scien/sadamoto_base/spring.html

"The Effective Mass of an Oscillating Spring" Amer. J. Phys., 38, 98 (1970)

"Effective Mass of an Oscillating Spring" The Physics Teacher, 45, 100 (2007)
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.