World Library  
Flag as Inappropriate
Email this Article
 

Excelsior tank

Tank, Heavy Assault, A33 (Excelsior)
Type Heavy tank
Place of origin United Kingdom
Production history
Manufacturer English Electric
Specifications (Second pilot)
Weight 40 tons
Length 22 ft 8 in (6.9 m)
Width 11 ft 2 in (3.4 m)
Height 7 ft 11 in (2.4 m)
Crew 5 (Commander, gunner, loader, driver, co-driver)

Armour 20 to 114 mm (0.79 to 4.49 in)
Main
armament
Ordnance QF 75 mm
64 rounds
Secondary
armament
2 x 7.92 mm Besa machine gun
Engine Rolls-Royce Meteor V12 petrol
620 bhp
Suspension Improved Christie
Operational
range
99 mi (160 km)
Speed 24 mph (39 km/h)
off-road: 12 mph

The Tank, Heavy Assault, A33 (Excelsior) was a British experimental heavy tank based on the Cromwell (A27) design developed in the Second World War when there were concerns as to performance of the Churchill tank.

Contents

  • Development 1
  • Survivors 2
  • See also 3
  • References 4

Development

After the Dieppe Raid in August 1942, there was concern that the Churchill infantry tank was slow and too unreliable and it was suggested that production of the Churchill stop in 1943 in order to manufacture more of the A27 (Cromwell) design which was performing well in trials.[1]

While two lines of tanks were still policy, there was interest in a "universal tank chassis" from which infantry tank and cruiser tank and other vehicles could be built. Until then an interim design based on the A27 to replace the Churchill as an infantry tank was considered.[1]

Rolls-Royce proposed an up-armoured A27 (Cromwell) and a more thorough redesign of the A27 with stronger suspension and armour equivalent to the Churchill. English Electric proposed using the A27 hull and turret with extra armour[2] and the track and suspension of the 50-ton US M6 Heavy Tank which had been developed for both US and British use.[1]

English Electric built two prototypes on a Cromwell tank hull the first with the suspension of the M6 tank in 1943 though with a 6-pounder gun. The second was built with a widened Cromwell track and different armoured skirts. The design included extra armour and an Ordnance QF 75 mm gun. When the problems of the early Churchill models were worked out, the A33 was no longer required and the project was dropped.[3]

Survivors

See also

References

Notes
  1. ^ a b c Chamberlain & Ellis (1969) p80
  2. ^ The armour on the Cromwell was bolted to the outside of the turret
  3. ^  
Bibliography
  • White BT, British Tanks 1915-1945 Ian Allen p68-69
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.