Lever, one of the six simple machines

Levers can be used to exert a large force over a small distance at one end by exerting only a small force over a greater distance at the other.

Classification

Simple machine

Industry

Construction

Weight

Mass times gravitational acceleration

Fuel source

potential and kinetic energy {mechanical energy }

Components

fulcrum or pivot, load and effort

A lever ( or UK ) is a machine consisting of a beam or rigid rod pivoted at a fixed hinge, or fulcrum. It is one of the six simple machines identified by Renaissance scientists. The word comes from the French lever, "to raise", cf. a levant. A lever amplifies an input force to provide a greater output force, which is said to provide leverage. The ratio of the output force to the input force is the mechanical advantage of the lever.
Contents

Early use 1

Force and levers 2

Classes of levers 3

Law of the lever 4

Virtual Work and the Law of the Lever 5

See also 6

Notes 7

References 8

External links 9
Early use
The earliest remaining writings regarding levers date from the 3rd century BC and were provided by Archimedes. "Give me a place to stand, and I shall move the Earth with it"^{[note 1]} is a remark of Archimedes who formally stated the correct mathematical principle of levers (quoted by Pappus of Alexandria).^{[1]}
It is assumed^{[2]} that in ancient Egypt, constructors used the lever to move and uplift obelisks weighing more than 100 tons.
Force and levers
A lever in balance
A lever is a beam connected to ground by a hinge, or pivot, called a fulcrum. The ideal lever does not dissipate or store energy, which means there is no friction in the hinge or bending in the beam. In this case, the power into the lever equals the power out, and the ratio of output to input force is given by the ratio of the distances from the fulcrum to the points of application of these forces. This is known as the law of the lever.
The mechanical advantage of a lever can be determined by considering the balance of moments or torque, T, about the fulcrum,

T_{1} = M_{1}a=M_{2}b =T_{2},\!
where M_{1} is the input force to the lever and M_{2} is the output force. The distances a and b are the perpendicular distances between the forces and the fulcrum.
The mechanical advantage of the lever is the ratio of output force to input force,

MA = \frac{M_{2}}{M_{1}} = \frac{a}{b}.\!
This relationship shows that the mechanical advantage can be computed from ratio of the distances from the fulcrum to where the input and output forces are applied to the lever, assuming no losses due to friction, flexibility or wear.
Classes of levers
Three classes of levers
Levers are classified by the relative positions of the fulcrum and the input and output forces. It is common to call the input force the effort and the output force the load or the resistance. This allows the identification of three classes of levers by the relative locations of the fulcrum, the resistance and the effort:^{[3]}

Class 1: Fulcrum in the middle: the effort is applied on one side of the fulcrum and the resistance on the other side, for example, a crowbar or a pair of scissors. Mechanical advantage may be greater or less than 1.

Class 2: Resistance in the middle: the effort is applied on one side of the resistance and the fulcrum is located on the other side, for example, a wheelbarrow, a nutcracker, a bottle opener or the brake pedal of a car. Mechanical advantage is always greater than 1.

Class 3: Effort in the middle: the resistance is on one side of the effort and the fulcrum is located on the other side, for example, a pair of tweezers or the human mandible. Mechanical advantage is always less than 1.
These cases are described by the mnemonic "fre 123" where the fulcrum is in the middle for the 1st class lever, the resistance is in the middle for the 2nd class lever, and the effort is in the middle for the 3rd class lever. Another way to remember this is the mnemomic for what is in the middle. First order, Fulcrum in the middle; second order, Load (Resistance) in the middle; third order, Effort in the middle. The mnemomic is Levers Flex.
Law of the lever
The lever is a movable bar that pivots on a fulcrum attached to a fixed point. The lever operates by applying forces at different distances from the fulcrum, or a pivot.
Assuming the lever does not dissipate or store energy, the power into the lever must equal the power out of the lever. As the lever rotates around the fulcrum, points farther from this pivot move faster than points closer to the pivot. Therefore a force applied to a point farther from the pivot must be less than the force located at a point closer in, because power is the product of force and velocity.^{[4]}
If a and b are distances from the fulcrum to points A and B and let the force F_{A} applied to A is the input and the force F_{B} applied at B is the output, the ratio of the velocities of points A and B is given by a/b, so we have the ratio of the output force to the input force, or mechanical advantage, is given by

MA = \frac{F_B}{F_A} = \frac{a}{b}.
This is the law of the lever, which was proven by Archimedes using geometric reasoning.^{[5]} It shows that if the distance a from the fulcrum to where the input force is applied (point A) is greater than the distance b from fulcrum to where the output force is applied (point B), then the lever amplifies the input force. On the other hand, if the distance a from the fulcrum to the input force is less than the distance b from the fulcrum to the output force, then the lever reduces the input force.
The use of velocity in the static analysis of a lever is an application of the principle of virtual work.
Virtual Work and the Law of the Lever
A lever is modeled as a rigid bar connected to a ground frame by a hinged joint called a fulcrum. The lever is operated by applying an input force F_{A} at a point A located by the coordinate vector r_{A} on the bar. The lever then exerts an output force F_{B} at the point B located by r_{B}. The rotation of the lever about the fulcrum P is defined by the rotation angle θ in radians.
This is an engraving from Mechanics Magazine published in London in 1824.
Let the coordinate vector of the point P that defines the fulcrum be r_{P}, and introduce the lengths

a = \mathbf{r}_A  \mathbf{r}_P, \quad b = \mathbf{r}_B  \mathbf{r}_P,
which are the distances from the fulcrum to the input point A and to the output point B, respectively.
Now introduce the unit vectors e_{A} and e_{B} from the fulcrum to the point A and B, so

\mathbf{r}_A  \mathbf{r}_P = a\mathbf{e}_A, \quad \mathbf{r}_B  \mathbf{r}_P = b\mathbf{e}_B.
The velocity of the points A and B are obtained as

\mathbf{v}_A = \dot{\theta} a \mathbf{e}_A^\perp, \quad \mathbf{v}_B = \dot{\theta} b \mathbf{e}_B^\perp,
where e_{A}^{⊥} and e_{B}^{⊥} are unit vectors perpendicular to e_{A} and e_{B}, respectively.
The angle θ is the generalized coordinate that defines the configuration of the lever, and the generalized force associated with this coordinate is given by

F_\theta = \mathbf{F}_A \cdot \frac{\partial\mathbf{v}_A}{\partial\dot{\theta}}  \mathbf{F}_B \cdot \frac{\partial\mathbf{v}_B}{\partial\dot{\theta}}= a(\mathbf{F}_A \cdot \mathbf{e}_A^\perp)  b(\mathbf{F}_B \cdot \mathbf{e}_B^\perp) = a F_A  b F_B ,
where F_{A} and F_{B} are components of the forces that are perpendicular to the radial segments PA and PB. The principle of virtual work states that at equilibrium the generalized force is zero, that is

F_\theta = a F_A  b F_B = 0. \,\!
Thus, the ratio of the output force F_{B} to the input force F_{A} is obtained as

MA = \frac{F_B}{F_A} = \frac{a}{b},
which is the mechanical advantage of the lever.
This equation shows that if the distance a from the fulcrum to the point A where the input force is applied is greater than the distance b from fulcrum to the point B where the output force is applied, then the lever amplifies the input force. If the opposite is true that the distance from the fulcrum to the input point A is less than from the fulcrum to the output point B, then the lever reduces the magnitude of the input force.
This is the law of the lever, which was proven by Archimedes using geometric reasoning.^{[6]}
See also
Notes

^ If this feat were attempted in a uniform gravitational field with an acceleration equivalent to that of the Earth, the corresponding distance to the fulcrum which a human of mass 70 kg would be required to stand to balance a sphere of 1 Earth mass, with center of gravity 1 m to the fulcrum, would be roughly equal to 8.5×10^{22} m [1]. This distance might be exemplified in astronomical terms as the approximate distance to the Circinus galaxy (roughly 3.6 times the distance to the Andromeda Galaxy)  about 9 million light years.
References

^ Mackay, Alan Lindsay (1991). "Archimedes ca 287–212 BC". A Dictionary of scientific quotations. London: Taylor and Francis. p. 11.

^ Budge, E.A. Wallis (2003). Cleopatra's Needles and Other Egyptian Obelisks. Kessinger Publishing. p. 28.

^ Davidovits, Paul (2008). "Chapter 1". Physics in Biology and Medicine, Third edition. Academic Press. p. 10.

^ Uicker, John; Pennock, Gordon; Shigley, Joseph (2010). Theory of Machines and Mechanisms (4th ed.). Oxford University Press, USA.

^

^ A. P. Usher, 1929, A History of Mechanical Inventions, Harvard University Press, (reprinted by Dover Publications 1968).
External links


Classical simple machines



This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.