Template:Special relativity
In physics, mass–energy equivalence is the concept that the mass of an object or system is a measure of its energy content. For instance, adding 25 kilowatthours (90 megajoules) of any form(s) of energy to any object increases its mass by 1 microgram. If you had a sensitive enough mass balance or scale, this mass increase of the object could be verified.
A physical system has a property called energy and a corresponding property called mass; the two properties are equivalent in that they are always both present in the same (i.e. constant) proportion to one another. Mass–energy equivalence arose originally from special relativity, as developed by Albert Einstein, who proposed this equivalence in 1905 in one of his Annus Mirabilis papers entitled "Does the inertia of an object depend upon its energy content?"^{[1]} The equivalence is described by the famous equation:
 $E\; =\; mc^2\; \backslash ,\backslash !$
where E is energy, m is mass, and c is the speed of light. Thus, this mass–energy relation states that the universal proportionality factor between equivalent amounts of energy and mass is equal to the speed of light squared. This also serves to convert units of mass to units of energy, no matter what system of measurement units is used.
If a body is stationary, it still has some internal or intrinsic energy, called its rest energy. Rest mass and rest energy are equivalent and remain proportional to one another. When the body is in motion (relative to an observer), its total energy is greater than its rest energy. The rest mass (or rest energy) remains an important quantity in this case because it remains the same regardless of this motion, even for the extreme speeds or gravity considered in special and general relativity; thus it's also called the invariant mass.
On the one hand, the equation E = mc^{2} can be applied to rest mass (m or m_{0}) and rest energy (E_{0}) to show their proportionality as E_{0} = m_{0}c^{2}.^{[2]}
On the other hand, it can also be applied to the total energy (E_{tot} or simply E) and total mass of a moving body. The total mass is also called the relativistic mass m_{rel}, because it isn't noticeably greater than the rest mass until the speed approaches that of light, where we have to use special relativity in order to describe the motion. So, the total energy and total mass are related by E = m_{rel}c^{2}.^{[3]}
Thus, the mass–energy relation E = mc^{2} can be used to relate the rest energy to the rest mass, or to relate the total energy to the total mass. To instead relate the total energy or mass to the rest energy or mass, a generalization of the mass–energy relation is required: the energy–momentum relation.
E = mc^{2} has sometimes been used as an explanation for the origin of energy in nuclear processes, but such processes can be understood as simply converting nuclear potential energy, without the need to invoke mass–energy equivalence. Instead, mass–energy equivalence merely indicates that the large amounts of energy released in such reactions may exhibit enough mass that the mass loss may be measured, when the released energy (and its mass) have been removed from the system. For example, the loss of mass to an atom and a neutron, as a result of the capture of the neutron and the production of a gamma ray, has been used to test mass–energy equivalence to high precision, as the energy of the gamma ray may be compared with the mass defect after capture. In 2005, these were found to agree to 0.0004%, the most precise test of the equivalence of mass and energy to date. This test was performed in the World Year of Physics 2005, a centennial celebration of Einstein's achievements in 1905.^{[4]}
Einstein was not the first to propose a mass–energy relationship (see the History section). However, Einstein was the first scientist to propose the } formula and the first to interpret mass–energy equivalence as a fundamental principle that follows from the relativistic symmetries of space and time.
Nomenclature
The formula was initially written in many different notations, and its interpretation and justification was further developed in several steps.^{[5]}^{[6]}
 In ″Does the inertia of a body depend upon its energy content?″ (1905), Einstein used V to mean the speed of light in a vacuum and L to mean the energy lost by a body in the form of radiation.^{[1]} Consequently, the equation E = mc^{2} was not originally written as a formula but as a sentence in German that meant if a body gives off the energy L in the form of radiation, its mass diminishes by L/V^{2}. A remark placed above it informed that the equation was approximated by neglecting "magnitudes of fourth and higher orders" of a series expansion.^{[7]}
 In May 1907, Einstein explained that the expression for energy ε of a moving mass point assumes the simplest form, when its expression for the state of rest is chosen to be ε_{0} = μV^{2} (where μ is the mass), which is in agreement with the "principle of the equivalence of mass and energy". In addition, Einstein used the formula μ = E_{0}/V^{2}, with E_{0} being the energy of a system of mass points, in order to describe the energy and mass increase of that system when the velocity of the differently moving mass points is increased.^{[8]}
 In June 1907, Max Planck rewrote Einstein's massenergy relationship as M = (E_{0} + pV_{0})/c^{2}, where p is the pressure and V the volume, in order to express the relation between mass, its "latent energy", and thermodynamic energy within the body.^{[9]} Subsequently in October 1907, this was rewritten as M_{0} = E_{0}/c^{2} and given a quantum interpretation by Johannes Stark, who assumed its validity and correctness (Gültigkeit).^{[10]}
 In December 1907, Einstein expressed the equivalence in the form M = μ + E_{0}/c^{2} and concluded: A mass μ is equivalent, as regards inertia, to a quantity of energy μc^{2}. [..] It appears far more natural to consider every inertial mass as a store of energy.^{[11]}^{[12]}
 In 1909, Gilbert N. Lewis and Richard C. Tolman used two variations of the formula: m = E/c^{2} and m_{0} = E_{0}/c^{2}, with E being the energy of a moving body, E_{0} its rest energy, m the relativistic mass, and m_{0} the invariant mass.^{[13]} The same relations in different notation were used by Hendrik Lorentz in 1913 (published 1914), though he placed the energy on the lefthand side: ε = Mc^{2} and ε_{0} = mc^{2}, with ε being the energy of a moving material point, ε_{0} its rest energy, M the relativistic mass, and m the invariant mass.^{[14]}
 In 1911, Max von Laue gave a more comprehensive proof of M_{0} = E_{0}/c^{2} from the Stress–energy tensor,^{[15]} which was later (1918) generalized by Felix Klein.^{[16]}
 Einstein returned to the topic once again after World War II and this time he wrote E = mc^{2} in the title of his article^{[17]} intended as an explanation for a general reader by analogy.^{[18]}
Conservation of mass and energy
Mass and energy can be seen as two names (and two measurement units) for the same underlying, conserved physical quantity.^{[19]} Thus, the laws of conservation of energy and conservation of (total) mass are equivalent and both hold true.^{[20]}^{[21]}
On the other hand, if the conservation of mass law is interpreted as conservation of rest mass, this does not hold true in general. The rest energy (equivalently, rest mass) of a particle can be converted, not "to energy" (it already is energy (mass)), but rather to other forms of energy (mass) which require motion, such as kinetic energy, thermal energy, or radiant energy; similarly, kinetic or radiant energy can be converted to other kinds of particles which have rest energy (rest mass). In the transformation process, neither the total amount of mass nor the total amount of energy changes, since both are properties which are connected to each other via a simple constant.^{[22]} This view requires that if either energy or (total) mass disappears from a system, it will always be found that both have simply moved off to another place, where they may both be measured as an increase of both energy and mass corresponding to the loss in the first system.
Fastmoving objects and systems of objects
When an object is pulled in the direction of motion, it gains momentum and energy, but when the object is already traveling near the speed of light, it cannot move much faster, no matter how much energy it absorbs. Its momentum and energy continue to increase without bounds, whereas its speed approaches a constant value—the speed of light. This implies that in relativity the momentum of an object cannot be a constant times the velocity, nor can the kinetic energy be a constant times the square of the velocity.
A property called the relativistic mass is defined as the ratio of the momentum of an object to its velocity.^{[23]} Relativistic mass depends on the motion of the object, so that different observers in relative motion see different values for it. If the object is moving slowly, the relativistic mass is nearly equal to the rest mass and both are nearly equal to the usual Newtonian mass. If the object is moving quickly, the relativistic mass is greater than the rest mass by an amount equal to the mass associated with the kinetic energy of the object. As the object approaches the speed of light, the relativistic mass grows infinitely, because the kinetic energy grows infinitely and this energy is associated with mass.
The relativistic mass is always equal to the total energy (rest energy plus kinetic energy) divided by c^{2}.^{[3]} Because the relativistic mass is exactly proportional to the energy, relativistic mass and relativistic energy are nearly synonyms; the only difference between them is the units. If length and time are measured in natural units, the speed of light is equal to 1, and even this difference disappears. Then mass and energy have the same units and are always equal, so it is redundant to speak about relativistic mass, because it is just another name for the energy. This is why physicists usually reserve the useful short word "mass" to mean rest mass, or invariant mass, and not relativistic mass.
The relativistic mass of a moving object is larger than the relativistic mass of an object that is not moving, because a moving object has extra kinetic energy. The rest mass of an object is defined as the mass of an object when it is at rest, so that the rest mass is always the same, independent of the motion of the observer: it is the same in all inertial frames.
For things and systems made up of many parts, like an atomic nucleus, planet, or star, the relativistic mass is the sum of the relativistic masses (or energies) of the parts, because energies are additive in isolated systems. This is not true in systems which are open, however, if energy is subtracted. For example, if a system is bound by attractive forces, and the energy gained due to the forces of attraction in excess of the work done is removed from the system, then mass will be lost with this removed energy. For example, the mass of an atomic nucleus is less than the total mass of the protons and neutrons that make it up, but this is only true after this energy from binding has been removed in the form of a gamma ray (which in this system, carries away the mass of the energy of binding). This mass decrease is also equivalent to the energy required to break up the nucleus into individual protons and neutrons (in this case, work and mass would need to be supplied). Similarly, the mass of the solar system is slightly less than the masses of sun and planets individually.
For a system of particles going off in different directions, the invariant mass of the system is the analog of the rest mass, and is the same for all observers, even those in relative motion. It is defined as the total energy (divided by c^{2}) in the center of mass frame (where by definition, the system total momentum is zero). A simple example of an object with moving parts but zero total momentum is a container of gas. In this case, the mass of the container is given by its total energy (including the kinetic energy of the gas molecules), since the system total energy and invariant mass are the same in any reference frame where the momentum is zero, and such a reference frame is also the only frame in which the object can be weighed. In a similar way, the theory of special relativity posits that the thermal energy in all objects (including solids) contributes to their total masses and weights, even though this energy is present as the kinetic and potential energies of the atoms in the object, and it (in a similar way to the gas) is not seen in the rest masses of the atoms that make up the object.
In a similar manner, even photons (light quanta), if trapped in a container space (as a photon gas or thermal radiation), would contribute a mass associated with their energy to the container. Such an extra mass, in theory, could be weighed in the same way as any other type of rest mass. This is true in special relativity theory, even though individually photons have no rest mass. The property that trapped energy in any form adds weighable mass to systems that have no net momentum is one of the characteristic and notable consequences of relativity. It has no counterpart in classical Newtonian physics, in which radiation, light, heat, and kinetic energy never exhibit weighable mass under any circumstances.
Just as the relativistic mass of isolated system is conserved through time, so also is its invariant mass. It is this property which allows the conservation of all types of mass in systems, and also conservation of all types of mass in reactions where matter is destroyed (annihilated), leaving behind the energy that was associated with it (which is now in nonmaterial form, rather than material form). Matter may appear and disappear in various reactions, but mass and energy are both unchanged in this process.
Applicability of the strict mass–energy equivalence formula, E = mc^{2}
As is noted above, two different definitions of mass have been used in special relativity, and also two different definitions of energy. The simple equation E = mc^{2} is not generally applicable to all these types of mass and energy, except in the special case that the total additive momentum is zero for the system under consideration. In such a case, which is always guaranteed when observing the system from either its center of mass frame or its center of momentum frame, E = mc^{2} is always true for any type of mass and energy that are chosen. Thus, for example, in the center of mass frame, the total energy of an object or system is equal to its rest mass times c^{2}, a useful equality. This is the relationship used for the container of gas in the previous example. It is not true in other reference frames where the center of mass is in motion. In these systems or for such an object, its total energy will depend on both its rest (or invariant) mass, and also its (total) momentum.^{[24]}
In inertial reference frames other than the rest frame or center of mass frame, the equation E = mc^{2} remains true if the energy is the relativistic energy and the mass the relativistic mass. It is also correct if the energy is the rest or invariant energy (also the minimum energy), and the mass is the rest mass, or the invariant mass. However, connection of the total or relativistic energy (E_{r}) with the rest or invariant mass (m_{0}) requires consideration of the system total momentum, in systems and reference frames where the total momentum has a nonzero value. The formula then required to connect the two different kinds of mass and energy, is the extended version of Einstein's equation, called the relativistic energy–momentum relation:^{[25]}
 $E\_r^2\; \; \backslash vec\{p\}\; \backslash ,^2\; c^2\; =\; m\_0^2\; c^4$
 $E\_r^2\; \; (pc)^2\; =\; (m\_0\; c^2)^2\backslash ,$
or
 $E\_r\; =\; \backslash sqrt\{\; (m\_0\; c^2)^2\; +\; (pc)^2\; \}\; \backslash ,\backslash !$
Here the (pc)^{2} term represents the square of the Euclidean norm (total vector length) of the various momentum vectors in the system, which reduces to the square of the simple momentum magnitude, if only a single particle is considered. This equation reduces to E = mc^{2} when the momentum term is zero. For photons where m_{0} = 0, the equation reduces to E_{r} = pc.
View a video explanation of the full equation at Minute Physics on Youtube
Meanings of the strict mass–energy equivalence formula, E = mc^{2}
Mass–energy equivalence states that any object has a certain energy, even when it is stationary. In Newtonian mechanics, a motionless body has no kinetic energy, and it may or may not have other amounts of internal stored energy, like chemical energy or thermal energy, in addition to any potential energy it may have from its position in a field of force. In Newtonian mechanics, all of these energies are much smaller than the mass of the object times the speed of light squared.
In relativity, all of the energy that moves along with an object (that is, all the energy which is present in the object's rest frame) contributes to the total mass of the body, which measures how much it resists acceleration. Each potential and kinetic energy makes a proportional contribution to the mass. As noted above, even if a box of ideal mirrors "contains" light, then the individually massless photons still contribute to the total mass of the box, by the amount of their energy divided by c^{2}.^{[26]}
In relativity, removing energy is removing mass, and for an observer in the center of mass frame, the formula m = E/c^{2} indicates how much mass is lost when energy is removed. In a nuclear reaction, the mass of the atoms that come out is less than the mass of the atoms that go in, and the difference in mass shows up as heat and light which has the same relativistic mass as the difference (and also the same invariant mass in the center of mass frame of the system). In this case, the E in the formula is the energy released and removed, and the mass m is how much the mass decreases. In the same way, when any sort of energy is added to an isolated system, the increase in the mass is equal to the added energy divided by c^{2}. For example, when water is heated it gains about 1.11×10^{Template:Val/delimitnum/gaps11} kg of mass for every joule of heat added to the water.
An object moves with different speed in different frames, depending on the motion of the observer, so the kinetic energy in both Newtonian mechanics and relativity is frame dependent. This means that the amount of relativistic energy, and therefore the amount of relativistic mass, that an object is measured to have depends on the observer. The rest mass is defined as the mass that an object has when it is not moving (or when an inertial frame is chosen such that it is not moving). The term also applies to the invariant mass of systems when the system as a whole is not "moving" (has no net momentum). The rest and invariant masses are the smallest possible value of the mass of the object or system. They also are conserved quantities, so long as the system is isolated. Because of the way they are calculated, the effects of moving observers are subtracted, so these quantities do not change with the motion of the observer.
The rest mass is almost never additive: the rest mass of an object is not the sum of the rest masses of its parts. The rest mass of an object is the total energy of all the parts, including kinetic energy, as measured by an observer that sees the center of the mass of the object to be standing still. The rest mass adds up only if the parts are standing still and do not attract or repel, so that they do not have any extra kinetic or potential energy. The other possibility is that they have a positive kinetic energy and a negative potential energy that exactly cancels.
Binding energy and the "mass defect"
Main article:
binding energy
Whenever any type of energy is removed from a system, the mass associated with the energy is also removed, and the system therefore loses mass. This mass defect in the system may be simply calculated as Δm = ΔE/c^{2}, and this was the form of the equation historically first presented by Einstein in 1905. However, use of this formula in such circumstances has led to the false idea that mass has been "converted" to energy. This may be particularly the case when the energy (and mass) removed from the system is associated with the binding energy of the system. In such cases, the binding energy is observed as a "mass defect" or deficit in the new system.
The fact that the released energy is not easily weighed in many such cases, may cause its mass to be neglected as though it no longer existed. This circumstance has encouraged the false idea of conversion of mass to energy, rather than the correct idea that the binding energy of such systems is relatively large, and exhibits a measurable mass, which is removed when the binding energy is removed. This energy is often released in the form of light and heat, which is too quickly and widely dispersed to be easily weighed, though it does carry mass.
The difference between the rest mass of a bound system and of the unbound parts is the binding energy of the system, if this energy has been removed after binding. For example, a water molecule weighs a little less than two free hydrogen atoms and an oxygen atom; the minuscule mass difference is the energy that is needed to split the molecule into three individual atoms (divided by c^{2}), and which was given off as heat when the molecule formed (this heat had mass). Likewise, a stick of dynamite in theory weighs a little bit more than the fragments after the explosion, but this is true only so long as the fragments are cooled and the heat removed. In this case the mass difference is the energy/heat that is released when the dynamite explodes, and when this heat escapes, the mass associated with it escapes, only to be deposited in the surroundings which absorb the heat (so that total mass is conserved).
Such a change in mass may only happen when the system is open, and the energy and mass escapes. Thus, if a stick of dynamite is blown up in a hermetically sealed chamber, the mass of the chamber and fragments, the heat, sound, and light would still be equal to the original mass of the chamber and dynamite. If sitting on a scale, the weight and mass would not change. This would in theory also happen even with a nuclear bomb, if it could be kept in an ideal box of infinite strength, which did not rupture or pass radiation.^{[27]} Thus, a 21.5 kiloton (9 x 10^{13} joule) nuclear bomb produces about one gram of heat and electromagnetic radiation, but the mass of this energy would not be detectable in an exploded bomb in an ideal box sitting on a scale; instead, the contents of the box would be heated to millions of degrees without changing total mass and weight. If then, however, a transparent window (passing only electromagnetic radiation) were opened in such an ideal box after the explosion, and a beam of Xrays and other lowerenergy light allowed to escape the box, it would eventually be found to weigh one gram less than it had before the explosion. This weight loss and mass loss would happen as the box was cooled by this process, to room temperature. However, any surrounding mass which had absorbed the Xrays (and other "heat") would gain this gram of mass from the resulting heating, so the mass "loss" would represent merely its relocation. Thus, no mass (or, in the case of a nuclear bomb, no matter) would be "converted" to energy in such a process. Mass and energy, as always, would both be separately conserved.
Massless particles
Massless particles have zero rest mass. Their relativistic mass is simply their relativistic energy, divided by c^{2}, or m(relativistic) = E/c^{2}.^{[28]}^{[29]} The energy for photons is E = hf where h is Planck's constant and f is the photon frequency. This frequency and thus the relativistic energy are framedependent.
If an observer runs away from a photon in the direction it travels from a source, having it catch up with the observer, then when the photon catches up it will be seen as having less energy than it had at the source. The faster the observer is traveling with regard to the source when the photon catches up, the less energy the photon will have. As an observer approaches the speed of light with regard to the source, the photon looks redder and redder, by relativistic Doppler effect (the Doppler shift is the relativistic formula), and the energy of a very longwavelength photon approaches zero. This is why a photon is massless; this means that the rest mass of a photon is zero.
Massless particles contribute rest mass and invariant mass to systems
Two photons moving in different directions cannot both be made to have arbitrarily small total energy by changing frames, or by moving toward or away from them. The reason is that in a twophoton system, the energy of one photon is decreased by chasing after it, but the energy of the other will increase with the same shift in observer motion. Two photons not moving in the same direction will exhibit an inertial frame where the combined energy is smallest, but not zero. This is called the center of mass frame or the center of momentum frame; these terms are almost synonyms (the center of mass frame is the special case of a center of momentum frame where the center of mass is put at the origin). The most that chasing a pair of photons can accomplish to decrease their energy is to put the observer in frame where the photons have equal energy and are moving directly away from each other. In this frame, the observer is now moving in the same direction and speed as the center of mass of the two photons. The total momentum of the photons is now zero, since their momentums are equal and opposite. In this frame the two photons, as a system, have a mass equal to their total energy divided by c^{2}. This mass is called the invariant mass of the pair of photons together. It is the smallest mass and energy the system may be seen to have, by any observer. It is only the invariant mass of a twophoton system that can be used to make a single particle with the same rest mass.
If the photons are formed by the collision of a particle and an antiparticle, the invariant mass is the same as the total energy of the particle and antiparticle (their rest energy plus the kinetic energy), in the center of mass frame, where they will automatically be moving in equal and opposite directions (since they have equal momentum in this frame). If the photons are formed by the disintegration of a single particle with a welldefined rest mass, like the neutral pion, the invariant mass of the photons is equal to rest mass of the pion. In this case, the center of mass frame for the pion is just the frame where the pion is at rest, and the center of mass does not change after it disintegrates into two photons. After the two photons are formed, their center of mass is still moving the same way the pion did, and their total energy in this frame adds up to the mass energy of the pion. Thus, by calculating the invariant mass of pairs of photons in a particle detector, pairs can be identified that were probably produced by pion disintegration.
A similar calculation illustrates that the invariant mass of systems is conserved, even when massive particles (particles with rest mass) within the system are converted to massless particles (such as photons). In such cases, the photons contribute invariant mass to the system, even though they individually have no invariant mass or rest mass. Thus, an electron and positron (each of which has rest mass) may undergo annihilation with each other to produce two photons, each of which is massless (has no rest mass). However, in such circumstances, no system mass is lost. Instead, the system of both photons moving away from each other has an invariant mass, which acts like a rest mass for any system in which the photons are trapped, or that can be weighed. Thus, not only the quantity of relativistic mass, but also the quantity of invariant mass does not change in transformations between "matter" (electrons and positrons) and energy (photons).
Relation to gravity
In physics, there are two distinct concepts of mass: the gravitational mass and the inertial mass. The gravitational mass is the quantity that determines the strength of the gravitational field generated by an object, as well as the gravitational force acting on the object when it is immersed in a gravitational field produced by other bodies. The inertial mass, on the other hand, quantifies how much an object accelerates if a given force is applied to it. The mass–energy equivalence in special relativity refers to the inertial mass. However, already in the context of Newton gravity, the Weak Equivalence Principle is postulated: the gravitational and the inertial mass of every object are the same. Thus, the mass–energy equivalence, combined with the Weak Equivalence Principle, results in the prediction that all forms of energy contribute to the gravitational field generated by an object. This observation is one of the pillars of the general theory of relativity.
The above prediction, that all forms of energy interact gravitationally, has been subject to experimental tests. The first observation testing this prediction was made in 1919.^{[30]} During a solar eclipse, Arthur Eddington observed that the light from stars passing close to the Sun was bent. The effect is due to the gravitational attraction of light by the sun. The observation confirmed that the energy carried by light indeed is equivalent to a gravitational mass. Another seminal experiment, the Pound–Rebka experiment, was performed in 1960.^{[31]} In this test a beam of light was emitted from the top of a tower and detected at the bottom. The frequency of the light detected was higher than the light emitted. This result confirms that the energy of photons increases when they fall in the gravitational field of the earth. The energy, and therefore the gravitational mass, of photons is proportional to their frequency as stated by the Planck's relation.
Consequences for nuclear physics
Max Planck pointed out that the mass–energy equivalence formula implied that bound systems would have a mass less than the sum of their constituents, once the binding energy had been allowed to escape. However, Planck was thinking about chemical reactions, where the binding energy is too small to measure. Einstein suggested that radioactive materials such as radium would provide a test of the theory, but even though a large amount of energy is released per atom in radium, due to the halflife of the substance (1602 years), only a small fraction of radium atoms decay over an experimentally measurable period of time.
Once the nucleus was discovered, experimenters realized that the very high binding energies of the atomic nuclei should allow calculation of their binding energies, simply from mass differences. But it was not until the discovery of the neutron in 1932, and the measurement of the neutron mass, that this calculation could actually be performed (see nuclear binding energy for example calculation). A little while later, the first transmutation reactions (such as^{[32]} the Cockcroft–Walton experiment: ^{7}Li + p → 2 ^{4}He) verified Einstein's formula to an accuracy of ±0.5%.
In 2005, Rainville et al. published a direct test of the energyequivalence of mass lost in the binding energy of a neutron to atoms of particular isotopes of silicon and sulfur, by comparing the mass lost to the energy of the emitted gamma ray associated with the neutron capture. The binding massloss agreed with the gamma ray energy to a precision of ±0.00004 %, the most accurate test of E = mc^{2} to date.^{[4]}
The mass–energy equivalence formula was used in the understanding of nuclear fission reactions, and implies the great amount of energy that can be released by a nuclear fission chain reaction, used in both nuclear weapons and nuclear power. By measuring the mass of different atomic nuclei and subtracting from that number the total mass of the protons and neutrons as they would weigh separately, one gets the exact binding energy available in an atomic nucleus. This is used to calculate the energy released in any nuclear reaction, as the difference in the total mass of the nuclei that enter and exit the reaction.
Practical examples
Einstein used the CGS system of units (centimeters, grams, seconds, dynes, and ergs), but the formula is independent of the system of units. In natural units, the speed of light is defined to equal 1, and the formula expresses an identity: E = m. In the SI system (expressing the ratio E / m in joules per kilogram using the value of c in meters per second):
 E / m = c^{2} = (299,792,458 m/s or 983,571,056 ft/s)^{2} = 89,875,517,873,681,764 J/kg (≈9.0 × 10^{16} joules per kilogram).
So the energy equivalent of one gram (1/1000 of a kilogram) of mass is equivalent to:
 89.9 terajoules
 25.0 million kilowatthours (≈25 GW·h)
 21.5 billion kilocalories (≈21 Tcal)^{ }^{[33]}
 85.2 billion BTUs^{[33]}
or to the energy released by combustion of the following:
 21.5 kilotons of TNTequivalent energy (≈21 kt)^{ }^{[33]}
 568,000 US gallons of automotive gasoline
Any time energy is generated, the process can be evaluated from an E = mc^{2} perspective. For instance, the "Gadget"style bomb used in the Trinity test and the bombing of Nagasaki had an explosive yield equivalent to 21 kt of TNT. About 1 kg of the approximately 6.15 kg of plutonium in each of these bombs fissioned into lighter elements totaling almost exactly one gram less, after cooling. The electromagnetic radiation and kinetic energy (thermal and blast energy) released in this explosion carried the missing one gram of mass.^{[34]} This occurs because nuclear binding energy is released whenever elements with more than 62 nucleons fission.
Another example is hydroelectric generation. The electrical energy produced by Grand Coulee Dam's turbines every 3.7 hours represents one gram of mass. This mass passes to the electrical devices (such as lights in cities) which are powered by the generators, where it appears as a gram of heat and light.^{[35]} Turbine designers look at their equations in terms of pressure, torque, and RPM. However, Einstein's equations show that all energy has mass, and thus the electrical energy produced by a dam's generators, and the heat and light which result from it, all retain their mass, which is equivalent to the energy. The potential energy—and equivalent mass—represented by the waters of the Columbia River as it descends to the Pacific Ocean would be converted to heat due to viscous friction and the turbulence of white water rapids and waterfalls were it not for the dam and its generators. This heat would remain as mass on site at the water, were it not for the equipment which converted some of this potential and kinetic energy into electrical energy, which can be moved from place to place (taking mass with it).
Whenever energy is added to a system, the system gains mass:
 A spring's mass increases whenever it is put into compression or tension. Its added mass arises from the added potential energy stored within it, which is bound in the stretched chemical (electron) bonds linking the atoms within the spring.
 Raising the temperature of an object (increasing its heat energy) increases its mass. For example, consider the world's primary mass standard for the kilogram, made of platinum/iridium. If its temperature is allowed to change by 1°C, its mass will change by 1.5 picograms (1 pg = 1 × 10^{−12} g).^{[36]}
 A spinning ball will weigh more than a ball that is not spinning. Its increase of mass is exactly the equivalent of the mass of energy of rotation, which is itself the sum of the kinetic energies of all the moving parts of the ball. For example, the Earth itself is more massive due to its daily rotation, than it would be with no rotation. This rotational energy (2.14 x 10^{29} J) represents 2.38 billion metric tons of added mass.^{[37]}
Note that no net mass or energy is really created or lost in any of these examples and scenarios. Mass/energy simply moves from one place to another. These are some examples of the transfer of energy and mass in accordance with the principle of mass–energy conservation.
Efficiency
Although mass cannot be converted to energy, in some reactions matter particles (which contain a form of rest energy) can be destroyed and converted to other types of energy which are more usable and obvious as forms of energy, such as light and energy of motion (heat, etc.). However, the total amount of energy and mass does not change in such a transformation. Even when particles are not destroyed, a certain fraction of the illdefined "matter" in ordinary objects can be destroyed, and its associated energy liberated and made available as the more dramatic energies of light and heat, even though no identifiable real particles are destroyed, and even though (again) the total energy is unchanged (as also the total mass). Such conversions between types of energy (resting to active energy) happen in nuclear weapons, in which the protons and neutrons in atomic nuclei lose a small fraction of their average mass, but this mass loss is not due to the destruction of any protons or neutrons (or even, in general, lighter particles like electrons). Also the mass is not destroyed, but simply removed from the system. in the form of heat and light from the reaction.
In nuclear reactions, typically only a small fraction of the total mass–energy of the bomb is converted into the mass–energy of heat, light, radiation and motion, which are "active" forms which can be used. When an atom fissions, it loses only about 0.1% of its mass (which escapes from the system and does not disappear), and in a bomb or reactor not all the atoms can fission. In a fission based atomic bomb, the efficiency is only 40%, so only 40% of the fissionable atoms actually fission, and only 0.04% of the total mass appears as energy in the end. In nuclear fusion, more of the mass is released as usable energy, roughly 0.3%. But in a fusion bomb (see nuclear weapon yield), the bomb mass is partly casing and nonreacting components, so that in practicality, no more than about 0.03% of the total mass of the entire weapon is released as usable energy (which, again, retains the "missing" mass).
In theory, it should be possible to destroy matter and convert all of the restenergy associated with matter into heat and light (which would of course have the same mass), but none of the theoretically known methods are practical. One way to convert all the energy within matter into usable energy is to annihilate matter with antimatter. But antimatter is rare in our universe, and must be made first. Due to inefficient mechanisms of production, making antimatter always requires far more usable energy than would be released when it was annihilated.
Since most of the mass of ordinary objects resides in protons and neutrons, in order to convert all of the energy of ordinary matter into a more useful type of energy, the protons and neutrons must be converted to lighter particles, or else particles with no restmass at all. In the standard model of particle physics, the number of protons plus neutrons is nearly exactly conserved. Still, Gerard 't Hooft showed that there is a process which will convert protons and neutrons to antielectrons and neutrinos.^{[38]} This is the weak SU(2) instanton proposed by Belavin Polyakov Schwarz and Tyupkin.^{[39]} This process, can in principle destroy matter and convert all the energy of matter into neutrinos and usable energy, but it is normally extraordinarily slow. Later it became clear that this process will happen at a fast rate at very high temperatures,^{[40]} since then instantonlike configurations will be copiously produced from thermal fluctuations. The temperature required is so high that it would only have been reached shortly after the big bang.
Many extensions of the standard model contain magnetic monopoles, and in some models of grand unification, these monopoles catalyze proton decay, a process known as the Callan–Rubakov effect.^{[41]} This process would be an efficient mass–energy conversion at ordinary temperatures, but it requires making monopoles and antimonopoles first. The energy required to produce monopoles is believed to be enormous, but magnetic charge is conserved, so that the lightest monopole is stable. All these properties are deduced in theoretical models—magnetic monopoles have never been observed, nor have they been produced in any experiment so far.
A third known method of total matter–energy "conversion" (which again in practice only means converstion of one type of energy into a different type of energy), is using gravity, specifically black holes. Stephen Hawking theorized^{[42]} that black holes radiate thermally with no regard to how they are formed. So it is theoretically possible to throw matter into a black hole and use the emitted heat to generate power. According to the theory of Hawking radiation, however, the black hole used will radiate at a higher rate the smaller it is, producing usable powers at only small black hole masses, where usable may for example be something greater than the local background radiation. It is also worth noting that the ambient irradiated power would change with the mass of the black hole, increasing as the mass of the black hole decreases, or decreasing as the mass increases, at a rate where power is proportional to the inverse square of the mass. In a "practical" scenario, mass and energy could be dumped into the black hole to regulate this growth, or keep its size, and thus power output, near constant. This could result from the fact that mass and energy are lost from the hole with its thermal radiation.
Background
Mass–velocity relationship
In developing special relativity, Einstein found that the kinetic energy of a moving body is
 $E\_k\; =\; m\_0\; (\; \backslash gamma\; 1\; )\; c^2\; =\; \backslash frac\{m\_0\; c^2\}\{\backslash sqrt\{1\backslash frac\{v^2\}\{c^2\}\}\}\; \; m\_0\; c^2,$
with $v$ the velocity, $m\_0$ the rest mass, and γ the Lorentz factor.
He included the second term on the right to make sure that for small velocities, the energy would be the same as in classical mechanics:
 $E\_k\; =\; \backslash frac\{1\}\{2\}m\_0\; v^2\; +\; \backslash cdots$
Without this second term, there would be an additional contribution in the energy when the particle is not moving.
Einstein found that the total momentum of a moving particle is:
 $P\; =\; \backslash frac\{m\_0\; v\}\{\backslash sqrt\{1\backslash frac\{v^2\}\{c^2\}\}\}.$
and it is this quantity which is conserved in collisions. The ratio of the momentum to the velocity is the relativistic mass, m.
 $m\; =\; \backslash frac\{m\_0\}\{\backslash sqrt\{1\backslash frac\{v^2\}\{c^2\}\}\}$
And the relativistic mass and the relativistic kinetic energy are related by the formula:
 $E\_k\; =\; m\; c^2\; \; m\_0\; c^2.\; \backslash ,$
Einstein wanted to omit the unnatural second term on the righthand side, whose only purpose is to make the energy at rest zero, and to declare that the particle has a total energy which obeys:
 $E\; =\; m\; c^2\; \backslash ,$
which is a sum of the rest energy m_{0}c^{2} and the kinetic energy. This total energy is mathematically more elegant, and fits better with the momentum in relativity. But to come to this conclusion, Einstein needed to think carefully about collisions. This expression for the energy implied that matter at rest has a huge amount of energy, and it is not clear whether this energy is physically real, or just a mathematical artifact with no physical meaning.
In a collision process where all the restmasses are the same at the beginning as at the end, either expression for the energy is conserved. The two expressions only differ by a constant which is the same at the beginning and at the end of the collision. Still, by analyzing the situation where particles are thrown off a heavy central particle, it is easy to see that the inertia of the central particle is reduced by the total energy emitted. This allowed Einstein to conclude that the inertia of a heavy particle is increased or diminished according to the energy it absorbs or emits.
Relativistic mass
After Einstein first made his proposal, it became clear that the word mass can have two different meanings. The rest mass is what Einstein called m, but others defined the relativistic mass with an explicit index:
 $m\_\{\backslash mathrm\{rel\}\}\; =\; \backslash frac\{m\_0\}\{\backslash sqrt\{1\backslash frac\{v^2\}\{c^2\}\}\}\backslash ,\backslash ,\; .$
This mass is the ratio of momentum to velocity, and it is also the relativistic energy divided by c^{2} (it is not Lorentzinvariant, in contrast to $m\_0$). The equation E = m_{rel}c^{2} holds for moving objects. When the velocity is small, the relativistic mass and the rest mass are almost exactly the same.
 E=mc^{2} either means E=m_{0}c^{2} for an object at rest, or E=m_{rel}c^{2} when the object is moving.
Also Einstein (following Hendrik Lorentz and Max Abraham) used velocity—and directiondependent mass concepts (longitudinal and transverse mass) in his 1905 electrodynamics paper and in another paper in 1906.^{[43]}^{[44]}
However, in his first paper on E=mc^{2} (1905), he treated m as what would now be called the rest mass.^{[1]} Some claim that (in later years) he did not like the idea of "relativistic mass."^{[2]} When modern physicists say "mass", they are usually talking about rest mass, since if they meant "relativistic mass", they would just say "energy".
Considerable debate has ensued over the use of the concept "relativistic mass" and the connection of "mass" in relativity to "mass" in Newtonian dynamics. For example, one view is that only rest mass is a viable concept and is a property of the particle; while relativistic mass is a conglomeration of particle properties and properties of spacetime. A perspective that avoids this debate, due to Kjell Vøyenli, is that the Newtonian concept of mass as a particle property and the relativistic concept of mass have to be viewed as embedded in their own theories and as having no precise connection.^{[45]}^{[46]}
Lowspeed expansion
We can rewrite the expression E = γm_{0}c^{2} as a Taylor series:
 $E\; =\; m\_0\; c^2\; \backslash left[1\; +\; \backslash frac\{1\}\{2\}\; \backslash left(\backslash frac\{v\}\{c\}\backslash right)^2\; +\; \backslash frac\{3\}\{8\}\; \backslash left(\backslash frac\{v\}\{c\}\backslash right)^4\; +\; \backslash frac\{5\}\{16\}\; \backslash left(\backslash frac\{v\}\{c\}\backslash right)^6\; +\; \backslash ldots\; \backslash right].$
For speeds much smaller than the speed of light, higherorder terms in this expression get smaller and smaller because v/c is small. For low speeds we can ignore all but the first two terms:
 $E\; \backslash approx\; m\_0\; c^2\; +\; \backslash frac\{1\}\{2\}\; m\_0\; v^2\; .$
The total energy is a sum of the rest energy and the Newtonian kinetic energy.
The classical energy equation ignores both the m_{0}c^{2} part, and the highspeed corrections. This is appropriate, because all the highorder corrections are small. Since only changes in energy affect the behavior of objects, whether we include the m_{0}c^{2} part makes no difference, since it is constant. For the same reason, it is possible to subtract the rest energy from the total energy in relativity. By considering the emission of energy in different frames, Einstein could show that the rest energy has a real physical meaning.
The higherorder terms are extra correction to Newtonian mechanics which become important at higher speeds. The Newtonian equation is only a lowspeed approximation, but an extraordinarily good one. All of the calculations used in putting astronauts on the moon, for example, could have been done using Newton's equations without any of the higherorder corrections.
History
While Einstein was the first to have correctly deduced the mass–energy equivalence formula, he was not the first to have related energy with mass. But nearly all previous authors thought that the energy which contributes to mass comes only from electromagnetic fields.^{[47]}^{[48]}^{[49]}^{[50]}
Newton: matter and light
In 1717 Isaac Newton speculated that light particles and matter particles were interconvertible in "Query 30" of the Opticks, where he asks:
Are not the gross bodies and light convertible into one another, and may not bodies receive much of their activity from the particles of light which enter their composition?
Swedenborg: matter composed of "pure and total motion"
In 1734 Emanuel Swedenborg in his Principia theorized that all matter is ultimately composed of dimensionless points of "pure and total motion." He described this motion as being without force, direction or speed, but having the potential for force, direction and speed everywhere within it.^{[51]}^{[52]}
Electromagnetic mass
There were many attempts in the 19th and the beginning of the 20th century—like those of J. J. Thomson (1881), Oliver Heaviside (1888), and George Frederick Charles Searle (1897), Wilhelm Wien (1900), Max Abraham (1902), Hendrik Antoon Lorentz (1904) — to understand as to how the mass of a charged object depends on the electrostatic field.^{[47]}^{[48]}
This concept was called electromagnetic mass, and was considered as being dependent on velocity and direction as well. Lorentz (1904) gave the following expressions for longitudinal and transverse electromagnetic mass:
 $m\_\{L\}=\backslash frac\{m\_\{0\}\}\{\backslash left(\backslash sqrt\{1\backslash frac\{v^\{2\}\}\{c^\{2\}\}\}\backslash right)^\{3\}\},\backslash quad\; m\_\{T\}=\backslash frac\{m\_\{0\}\}\{\backslash sqrt\{1\backslash frac\{v^\{2\}\}\{c^\{2\}\}\}\}$,
where
 $m\_\{0\}=\backslash frac\{4\}\{3\}\backslash frac\{E\_\{em\}\}\{c^\{2\}\}$
Radiation pressure and inertia
Another way of deriving some sort of electromagnetic mass was based on the concept of radiation pressure. In 1900, Henri Poincaré associated electromagnetic radiation energy with a "fictitious fluid" having momentum and mass
 $m\_\{em\}=E\_\{em\}/c^2\backslash ,.$
By that, Poincaré tried to save the center of mass theorem in Lorentz's theory, though his treatment led to radiation paradoxes.^{[50]}
Friedrich Hasenöhrl showed in 1904, that electromagnetic cavity radiation contributes the "apparent mass"
 $m\_\{0\}=\backslash tfrac\{4\}\{3\}\backslash tfrac\{E\_\{em\}\}\{c^\{2\}\}$
to the cavity's mass. He argued that this implies mass dependence on temperature as well.^{[53]}
Einstein: mass–energy equivalence
Albert Einstein did not formulate exactly the formula E = mc^{2} in his 1905 Annus Mirabilis paper "Does the Inertia of an object Depend Upon Its Energy Content?";^{[1]} rather, the paper states that if a body gives off the energy L in the form of radiation, its mass diminishes by L/c^{2}. (Here, "radiation" means electromagnetic radiation, or light, and mass means the ordinary Newtonian mass of a slowmoving object.) This formulation relates only a change Δm in mass to a change L in energy without requiring the absolute relationship.
Objects with zero mass presumably have zero energy, so the extension that all mass is proportional to energy is obvious from this result. In 1905, even the hypothesis that changes in energy are accompanied by changes in mass was untested. Not until the discovery of the first type of antimatter (the positron in 1932) was it found that all of the mass of pairs of resting particles could be converted to radiation.
The first derivation by Einstein (1905)
Already in his relativity paper "On the electrodynamics of moving bodies", Einstein derived the correct expression for the kinetic energy of particles:
 $E\_\{k\}=mc^\{2\}\backslash left(\backslash frac\{1\}\{\backslash sqrt\{1\backslash frac\{v^\{2\}\}\{c^\{2\}\}\}\}1\backslash right)$.
Now the question remained open as to which formulation applies to bodies at rest. This was tackled by Einstein in his paper "Does the inertia of a body depend upon its energy content?". Einstein used a body emitting two light pulses in opposite directions, having energies of E_{0} before and E_{1} after the emission as seen in its rest frame. As seen from a moving frame, this becomes H_{0} and H_{1}. Einstein obtained:
 $\backslash left(H\_\{0\}E\_\{0\}\backslash right)\backslash left(H\_\{1\}E\_\{1\}\backslash right)=E\backslash left(\backslash frac\{1\}\{\backslash sqrt\{1\backslash frac\{v^\{2\}\}\{c^\{2\}\}\}\}1\backslash right)$
then he argued that H − E can only differ from the kinetic energy K by an additive constant, which gives
 $K\_\{0\}K\_\{1\}=E\backslash left(\backslash frac\{1\}\{\backslash sqrt\{1\backslash frac\{v^\{2\}\}\{c^\{2\}\}\}\}1\backslash right)$
Neglecting effects higher than third order in v/c this gives:
 $K\_\{0\}K\_\{1\}=\backslash frac\{E\}\{c^\{2\}\}\backslash frac\{v^\{2\}\}\{2\}$
Thus Einstein concluded that the emission reduces the body's mass by E/c^{2}, and that the mass of a body is a measure of its energy content.
The correctness of Einstein's 1905 derivation of E = mc^{2} was criticized by Max Planck (1907), who argued that it is only valid to first approximation. Another criticism was formulated by Herbert Ives (1952) and Max Jammer (1961), asserting that Einstein's derivation is based on begging the question.^{[5]}^{[54]}
On the other hand, John Stachel and Roberto Torretti (1982) argued that Ives' criticism was wrong, and that Einstein's derivation was correct.^{[55]}
Hans Ohanian (2008) agreed with Stachel/Torretti's criticism of Ives, though he argued that Einstein's derivation was wrong for other reasons.^{[56]} For a recent review, see Hecht (2011).^{[6]}
Alternative version
An alternative version of Einstein's thought experiment was proposed by Fritz Rohrlich (1990), who based his reasoning on the Doppler effect.^{[57]}
Like Einstein, he considered a body at rest with mass M. If the body is examined in a frame moving with nonrelativistic velocity v, it is no longer at rest and in the moving frame it has momentum P = Mv. Then he supposed the body emits two pulses of light to the left and to the right, each carrying an equal amount of energy E/2. In its rest frame, the object remains at rest after the emission since the two beams are equal in strength and carry opposite momentum.
But if the same process is considered in a frame moving with velocity v to the left, the pulse moving to the left will be redshifted while the pulse moving to the right will be blue shifted. The blue light carries more momentum than the red light, so that the momentum of the light in the moving frame is not balanced: the light is carrying some net momentum to the right.
The object has not changed its velocity before or after the emission. Yet in this frame it has lost some rightmomentum to the light. The only way it could have lost momentum is by losing mass. This also solves Poincaré's radiation paradox, discussed above.
The velocity is small, so the rightmoving light is blueshifted by an amount equal to the nonrelativistic Doppler shift factor 1 − v/c. The momentum of the light is its energy divided by c, and it is increased by a factor of v/c. So the rightmoving light is carrying an extra momentum ΔP given by:
 $$
\Delta P = {v \over c}{E \over 2c}.
\,
The leftmoving light carries a little less momentum, by the same amount ΔP. So the total rightmomentum in the light is twice ΔP. This is the rightmomentum that the object lost.
 $$
2\Delta P = v {E\over c^2}.
\,
The momentum of the object in the moving frame after the emission is reduced by this amount:
 $$
P' = Mv  2\Delta P = \left(M  {E\over c^2}\right)v.
\,
So the change in the object's mass is equal to the total energy lost divided by c^{2}. Since any emission of energy can be carried out by a two step process, where first the energy is emitted as light and then the light is converted to some other form of energy, any emission of energy is accompanied by a loss of mass. Similarly, by considering absorption, a gain in energy is accompanied by a gain in mass.
Relativistic centerofmass theorem (1906)
Like Poincaré, Einstein concluded in 1906 that the inertia of electromagnetic energy is a necessary condition for the centerofmass theorem to hold. On this occasion, Einstein referred to Poincaré's 1900 paper and wrote:^{[58]}
Although the merely formal considerations, which we will need for the proof, are already mostly contained in a work by H. Poincaré^{2}, for the sake of clarity I will not rely on that work.^{[59]}
In Einstein's more physical, as opposed to formal or mathematical, point of view, there was no need for fictitious masses. He could avoid the perpetuum mobile problem, because on the basis of the mass–energy equivalence he could show that the transport of inertia which accompanies the emission and absorption of radiation solves the problem. Poincaré's rejection of the principle of action–reaction can be avoided through Einstein's E = mc^{2}, because mass conservation appears as a special case of the energy conservation law.
Others
During the nineteenth century there were several speculative attempts to show that mass and energy were proportional in various ether theories.^{[60]} In 1873 Nikolay Umov pointed out a relation between mass and energy for ether in the form of Е = kmc^{2}, where 0.5 ≤ k ≤ 1.^{[61]} The writings of Samuel Tolver Preston,^{[62]}^{[63]} and a 1903 paper by Olinto De Pretto,^{[64]}^{[65]} presented a mass–energy relation. De Pretto's paper received recent press coverage when Umberto Bartocci discovered that there were only three degrees of separation linking De Pretto to Einstein, leading Bartocci to conclude that Einstein was probably aware of De Pretto's work.^{[66]}
Preston and De Pretto, following Le Sage, imagined that the universe was filled with an ether of tiny particles which are always moving at speed c. Each of these particles have a kinetic energy of mc^{2} up to a small numerical factor. The nonrelativistic kinetic energy formula did not always include the traditional factor of 1/2, since Leibniz introduced kinetic energy without it, and the 1/2 is largely conventional in prerelativistic physics.^{[67]} By assuming that every particle has a mass which is the sum of the masses of the ether particles, the authors would conclude that all matter contains an amount of kinetic energy either given by E = mc^{2} or 2E = mc^{2} depending on the convention. A particle ether was usually considered unacceptably speculative science at the time,^{[68]} and since these authors did not formulate relativity, their reasoning is completely different from that of Einstein, who used relativity to change frames.
Independently, Gustave Le Bon in 1905 speculated that atoms could release large amounts of latent energy, reasoning from an allencompassing qualitative philosophy of physics.^{[69]}^{[70]}
Radioactivity and nuclear energy
It was quickly noted after the discovery of radioactivity in 1897, that the total energy due to radioactive processes is about one million times greater than that involved in any known molecular change. However, it raised the question where this energy is coming from. After eliminating the idea of absorption and emission of some sort of Lesagian ether particles, the existence of a huge amount of latent energy, stored within matter, was proposed by Ernest Rutherford and Frederick Soddy in 1903. Rutherford also suggested that this internal energy is stored within normal matter as well. He went on to speculate in 1904:^{[71]}^{[72]}
If it were ever found possible to control at will the rate of disintegration of the radioelements, an enormous amount of energy could be obtained from a small quantity of matter.
Einstein's equation is in no way an explanation of the large energies released in radioactive decay (this comes from the powerful nuclear forces involved; forces that were still unknown in 1905). In any case, the enormous energy released from radioactive decay (which had been measured by Rutherford) was much more easily measured than the (still small) change in the gross mass of materials, as a result. Einstein's equation, by theory, can give these energies by measuring mass differences before and after reactions, but in practice, these mass differences in 1905 were still too small to be measured in bulk. Prior to this, the ease of measuring radioactive decay energies with a calorimeter was thought possibly likely to allow measurement of changes in mass difference, as a check on Einstein's equation itself. Einstein mentions in his 1905 paper that mass–energy equivalence might perhaps be tested with radioactive decay, which releases enough energy (the quantitative amount known roughly by 1905) to possibly be "weighed," when missing from the system (having been given off as heat). However, radioactivity seemed to proceed at its own unalterable (and quite slow, for radioactives known then) pace, and even when simple nuclear reactions became possible using proton bombardment, the idea that these great amounts of usable energy could be liberated at will with any practicality, proved difficult to substantiate. It had been used as the basis of much speculation, causing Rutherford himself to later reject his ideas of 1904; he was reported in 1933 to have said that: "Anyone who expects a source of power from the transformation of the atom is talking moonshine."^{[73]}
This situation changed dramatically in 1932 with the discovery of the neutron and its mass, allowing mass differences for single nuclides and their reactions to be calculated directly, and compared with the sum of masses for the particles that made up their composition. In 1933, the energy released from the reaction of lithium7 plus protons giving rise to 2 alpha particles (as noted above by Rutherford), allowed Einstein's equation to be tested to an error of ± 0.5%. However, scientists still did not see such reactions as a source of power.
After the very public demonstration of huge energies released from nuclear fission after the atomic bombings of Hiroshima and Nagasaki in 1945, the equation E = mc^{2} became directly linked in the public eye with the power and peril of nuclear weapons. The equation was featured as early as page 2 of the Smyth Report, the official 1945 release by the US government on the development of the atomic bomb, and by 1946 the equation was linked closely enough with Einstein's work that the cover of Time magazine prominently featured a picture of Einstein next to an image of a mushroom cloud emblazoned with the equation.^{[74]} Einstein himself had only a minor role in the Manhattan Project: he had cosigned a letter to the U.S. President in 1939 urging funding for research into atomic energy, warning that an atomic bomb was theoretically possible. The letter persuaded Roosevelt to devote a significant portion of the wartime budget to atomic research. Without a security clearance, Einstein's only scientific contribution was an analysis of an isotope separation method in theoretical terms. It was inconsequential, on account of Einstein not being given sufficient information (for security reasons) to fully work on the problem.^{[75]}
While E = mc^{2} is useful for understanding the amount of energy potentially released in a fission reaction, it was not strictly necessary to develop the weapon, once the fission process was known, and its energy measured at 200 MeV (which was directly possible, using a quantitative Geiger counter, at that time). As the physicist and Manhattan Project participant Robert Serber put it: "Somehow the popular notion took hold long ago that Einstein's theory of relativity, in particular his famous equation E = mc^{2}, plays some essential role in the theory of fission. Albert Einstein had a part in alerting the United States government to the possibility of building an atomic bomb, but his theory of relativity is not required in discussing fission. The theory of fission is what physicists call a nonrelativistic theory, meaning that relativistic effects are too small to affect the dynamics of the fission process significantly."^{[76]} However the association between E = mc^{2} and nuclear energy has since stuck, and because of this association, and its simple expression of the ideas of Albert Einstein himself, it has become "the world's most famous equation".^{[77]}
While Serber's view of the strict lack of need to use mass–energy equivalence in designing the atomic bomb is correct, it does not take into account the pivotal role which this relationship played in making the fundamental leap to the initial hypothesis that large atoms were energetically allowed to split into approximately equal parts (before this energy was in fact measured). In late 1938, while on the winter walk on which they solved the meaning of Hahn's experimental results and introduced the idea that would be called atomic fission, Lise Meitner and Otto Robert Frisch made direct use of Einstein's equation to help them understand the quantitative energetics of the reaction which overcame the "surface tensionlike" forces holding the nucleus together, and allowed the fission fragments to separate to a configuration from which their charges could force them into an energetic "fission". To do this, they made use of "packing fraction", or nuclear binding energy values for elements, which Meitner had memorized. These, together with use of E = mc^{2} allowed them to realize on the spot that the basic fission process was energetically possible:
...We walked up and down in the snow, I on skis and she on foot. ...and gradually the idea took shape... explained by Bohr's idea that the nucleus is like a liquid drop; such a drop might elongate and divide itself... We knew there were strong forces that would resist, ..just as surface tension. But nuclei differed from ordinary drops. At this point we both sat down on a tree trunk and started to calculate on scraps of paper. ...the Uranium nucleus might indeed be a very wobbly, unstable drop, ready to divide itself... But, ...when the two drops separated they would be driven apart by electrical repulsion, about 200 MeV in all. Fortunately Lise Meitner remembered how to compute the masses of nuclei... and worked out that the two nuclei formed... would be lighter by about onefifth the mass of a proton. Now whenever mass disappears energy is created, according to Einstein's formula E = mc^{2}, and... the mass was just equivalent to 200 MeV; it all fitted!^{[78]}^{[79]}
See also
References
External links
 The Equivalence of Mass and Energy – Entry in the Stanford Encyclopedia of Philosophy
 Living Reviews in Relativity – An open access, peerreferred, solely online physics journal publishing invited reviews covering all areas of relativity research.
 – An easy to understand, highschool level derivation of the E=mc^{2} formula.
 Einstein on the Inertia of Energy – MathPages

 Mass and Energy – Conversations About Science with Theoretical Physicist Matt Strassler
 Einstein on mass and energy, Eugene Hecht, Am. J. Phys. 77, 799 (2009). For example, “Early on, Einstein embraced the idea of a speeddependent mass but changed his mind in 1906 and thereafter carefully avoided that notion entirely. He shunned, and explicitly rejected, what later came to be known as 'relativistic mass'. ... He consistently related the rest energy of a system to its invariant inertial mass.”
Template:Einstein
Template:Relativity
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.