Molar concentration, also called molarity, amount concentration or substance concentration, is a measure of the concentration of a solute in a solution, or of any chemical species in terms of amount of substance in a given volume. A commonly used unit for molar concentration used in chemistry is mol/L. A solution of concentration 1 mol/L is also denoted as 1 molar (1 M).
Contents

Definition 1

Units 2

Related quantities 3

Number concentration 3.1

Mass concentration 3.2

Mole fraction 3.3

Mass fraction 3.4

Molality 3.5

Properties 4

Sum of molar concentrations – normalizing relations 4.1

Sum of products molar concentrations + partial molar volumes 4.2

Dependence on volume 4.3

Spatial variation and diffusion 5

Examples 6

Formal concentration 7

References 8

External links 9
Definition
Molar concentration or molarity is most commonly expressed in units of moles of solute per litre of solution. For use in broader applications, it is defined as amount of solute per unit volume of solution, or per unit volume available to the species, represented by lowercase c:^{[1]}

c = \frac{n}{V} = \frac{N}{N_{\rm A}\,V} = \frac{C}{N_{\rm A}}.
Here, n is the amount of the solute in moles,^{[2]} N is the number of molecules present in the volume V (in litres), the ratio N/V is the number concentration C, and N_{A} is the Avogadro constant, approximately 6.022×10^{23} mol^{−1}.
Or more simply: 1 molar = 1 M = 1 mole/litre.
In thermodynamics the use of molar concentration is often not convenient, because the volume of most solutions slightly depends on temperature due to thermal expansion. This problem is usually resolved by introducing temperature correction factors, or by using a temperatureindependent measure of concentration such as molality.^{[2]}
The reciprocal quantity represents the dilution (volume) which can appear in Ostwald's law of dilution.
Units
In the International System of Units (SI) the base unit for molar concentration is mol/m^{3}. However, this is impractical for most laboratory purposes and most chemical literature traditionally uses mol/dm^{3}, or mol dm^{3}, which is the same as mol/L. These traditional units are often denoted by a capital letter M (pronounced molar), sometimes preceded by an SI prefix to denote submultiples, for example:

mol/m^{3} = 10^{3} mol/dm^{3} = 10^{3} mol/L = 10^{3} M = 1 mmol/L = 1 mM.
The words "millimolar" and "micromolar" refer to mM and μM (10^{3} mol/L and 10^{6} mol/L), respectively.
Name

Abbreviation

Concentration

Concentration (SI unit)

millimolar

mM

10^{−3} mol/dm^{3}

10^{0} mol/m^{3}

micromolar

μM

10^{−6} mol/dm^{3}

10^{−3} mol/m^{3}

nanomolar

nM

10^{−9} mol/dm^{3}

10^{−6} mol/m^{3}

picomolar

pM

10^{−12} mol/dm^{3}

10^{−9} mol/m^{3}

femtomolar

fM

10^{−15} mol/dm^{3}

10^{−12} mol/m^{3}

attomolar

aM

10^{−18} mol/dm^{3}

10^{−15} mol/m^{3}

zeptomolar

zM

10^{−21} mol/dm^{3}

10^{−18} mol/m^{3}

yoctomolar

yM^{[3]}

10^{−24} mol/dm^{3}
(1 particle per 1.6 L)

10^{−21} mol/m^{3}

Related quantities
Number concentration
The conversion to number concentration C_i is given by:

C_i = c_i \cdot N_{\rm A}
where N_{\rm A} is the Avogadro constant, approximately 6.022×10^{23} mol^{−1}.
Mass concentration
The conversion to mass concentration \rho_i is given by:

\rho_i = c_i \cdot M_i
where M_i is the molar mass of constituent i.
Mole fraction
The conversion to mole fraction x_i is given by:

x_i = c_i \cdot \frac{M}{\rho} = c_i \cdot \frac{\sum_i x_i M_i}{\rho}

x_i= c_i \cdot \frac{\sum x_j M_j}{\rho  c_i M_i}
where M is the average molar mass of the solution, \rho is the density of the solution and j is the index of other solutes.
A simpler relation can be obtained by considering the total molar concentration namely the sum of molar concentrations of all the components of the mixture.

x_i = \frac{c_i}{c} = \frac{c_i}{\sum c_i}
Mass fraction
The conversion to mass fraction w_i is given by:

w_i = c_i \cdot \frac{M_i}{\rho}
Molality
The conversion to molality (for binary mixtures) is:

b_2 = \frac \,
where the solute is assigned the subscript 2.
For solutions with more than one solute, the conversion is:

b_i = \frac \,
Properties
Sum of molar concentrations – normalizing relations
The sum of molar concentrations gives the total molar concentration, namely the density of the mixture divided by the molar mass of the mixture or by another name the reciprocal of the molar volume of the mixture. In an ionic solution, ionic strength is proportional to the sum of molar concentration of salts.
Sum of products molar concentrations + partial molar volumes
The sum of products between these quantities equals one.

\sum_i c_i \cdot \bar{V_i} = 1
Dependence on volume
Molar concentration depends on the variation of the volume of the solution due mainly to thermal expansion. On small intervals of temperature the dependence is :

c_i = \frac }
where c_{i,T_0} is the molar concentration at a reference temperature, \alpha is the thermal expansion coefficient of the mixture.
Spatial variation and diffusion
Molar and mass concentration have different values in space where diffusion happens.
Examples
Example 1: Consider 11.6 g of NaCl dissolved in 100 g of water. The final mass concentration \rho(NaCl) will be:

\rho(NaCl) = 11.6 g / (11.6 g + 100 g) = 0.104 g/g = 10.4 %
The density of such a solution is 1.07 g/mL, thus its volume will be:

V = (11.6 g + 100 g) / (1.07 g/mL) = 104.3 mL
The molar concentration of NaCl in the solution is therefore:

c(NaCl) = (11.6 g / 58 g/mol) / 104.3 mL = 0.00192 mol/mL = 1.92 mol/L
Here, 58 g/mol is the molar mass of NaCl.
Example 2: Another typical task in chemistry is the preparation of 100 mL (= 0.1 L) of a 2 mol/L solution of NaCl in water. The mass of salt needed is:

m(NaCl) = 2 mol/L x 0.1 L x 58 g/mol = 11.6 g
To create the solution, 11.6 g NaCl are placed in a volumetric flask, dissolved in some water, then followed by the addition of more water until the total volume reaches 100 mL.
Example 3: The density of water is approximately 1000 g/L and its molar mass is 18.02 g/mol (or 1/18.02=0.055 mol/g). Therefore, the molar concentration of water is:

c(H_{2}O) = 1000 g/L / (18.02 g/mol) = 55.5 mol/L
Likewise, the concentration of solid hydrogen (molar mass = 2.02 g/mol) is:

c(H_{2}) = 88 g/L / (2.02 g/mol) = 43.7 mol/L
The concentration of pure osmium tetroxide (molar mass = 254.23 g/mol) is:

c(OsO_{4}) = 5.1 kg/L / (254.23 g/mol) = 20.1 mol/L.
Example 4: A typical protein in bacteria, such as E. coli, may have about 60 copies, and the volume of a bacterium is about 10^{15} L. Thus, the number concentration C is:

C = 60 / (10^{−15} L)= 6×10^{16} L^{−1}
The molar concentration is:

c = C / N_A = 6×10^{16} L^{−1} / (6×10^{23} mol^{−1}) = 10^{−7} mol/L = 100 nmol/L
Formal concentration
If the concentration refers to original chemical formula in solution, the molar concentration is sometimes called formal concentration. For example, if a sodium carbonate solution has a formal concentration of c(Na_{2}CO_{3}) = 1 mol/L, the molar concentrations are c(Na^{+}) = 2 mol/L and c(CO_{3}^{2−}) = 1 mol/L because the salt dissociates into these ions.
References

^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "camount concentration, ".

^ ^{a} ^{b} Kaufman, Myron (2002). Principles of thermodynamics. CRC Press. p. 213.

^ David Bradley. "How low can you go? The Y to Y".
External links

Molar Solution Concentration Calculator

Experiment to determine the molar concentration of vinegar by titration
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.