The pound per square inch or, more accurately, pound-force per square inch (abbreviations: psi, lbf/in2, lbf/in2, lbf/sq in, lbf/sq in) is a unit of pressure or of stress based on avoirdupois units. It is the pressure resulting from a force of one pound-force applied to an area of one square inch:
1 psi = \frac{1\text{ lbf}}{(1\text{ in})^2} = \frac{4.4482216152605\text{ N}}{(0.0254\text{ m})^2} ≈ 6894.757293168 N/m²
Therefore, one pound per square inch is approximately 6894.757 Pa.
Now converting the psi to standard atmospheres:
\frac{1\text{ psi}}{6894.757293\text{ Pa}} \cdot \frac{1.01325\text{ x} \ 10^5\text{ Pa}}{1\text{ atm}} ≈ 14.69594877551 psi/atm
Therefore, 1 atmosphere is approximately 14.696 pounds per square inch.
Pounds per square inch absolute (psia) is used to make it clear that the pressure is relative to a vacuum rather than the ambient atmospheric pressure. Since atmospheric pressure at sea level is around 14.7 psi, this will be added to any pressure reading made in air at sea level. The converse is pounds per square inch gauge or pounds per square inch gage (psig), indicating that the pressure is relative to atmospheric pressure. For example a bicycle tire pumped up to 65 psi above atmospheric pressure, will have a pressure of 65 + 14.7 = 79.7 psia or 65 psig.[1][2]
ksi
The kilopound per square inch is a scaled unit derived from psi, equivalent to a thousand psi.
ksi are not widely used for gas pressures. They are mostly used in materials science, where the tensile strength of a material is measured as a large number of psi.
Magnitude
Conversions
Pressure units
|
Pascal
|
Bar
|
Technical atmosphere
|
Standard atmosphere
|
Torr
|
Pounds per square inch
|
(Pa)
|
(bar)
|
(at)
|
(atm)
|
(Torr)
|
(psi)
|
1 Pa
|
≡ 1 N/m2
|
10−5
|
1.0197×10−5
|
9.8692×10−6
|
7.5006×10−3
|
1.450377×10−4
|
1 bar
|
105
|
≡ 106 dyn/cm2
|
1.0197
|
0.98692
|
750.06
|
14.50377
|
1 at
|
0.980665×105
|
0.980665
|
≡ 1 kp/cm2
|
0.9678411
|
735.5592
|
14.22334
|
1 atm
|
1.01325×105
|
1.01325
|
1.0332
|
≡ p0
|
≡ 760
|
14.69595
|
1 Torr
|
133.3224
|
1.333224×10−3
|
1.359551×10−3
|
1.315789×10−3
|
≈ 1 mmHg
|
1.933678×10−2
|
1 psi
|
6.8948×103
|
6.8948×10−2
|
7.03069×10−2
|
6.8046×10−2
|
51.71493
|
≡ 1 lbF /in2
|
See also
References
-
^ "Glossary of Industrial Air Cleaning Technology". United Air Specialists, Inc.
-
^ "Gage v. Sealed v. Absolute pressure". Dynisco.
External links
-
Pressure measurement primer
-
Online pressure conversions
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.