Snake (electrical)

An audio multicore cable (often colloquially referred to in America as a snake cable or just a snake) is a cable which contains from 4 to 64 individual audio cables inside a common outer jacket. Audio multicore cables are widely used whenever multiple audio signals, for example from a number of microphones, need to be conveyed between common locations. Typical professional audio applications include audio recording, sound reinforcement, and broadcasting.

The term can be used to refer to the basic cable as may be obtained from a supplier, or a cable with the ends terminated in either a multipin connector, a number of separate connectors on the individual pairs, or a box or panel with a number of chassis-mounted connectors. Different termination methods can be used on each end to suit the application. When individual connectors are used, three pin XLR connectors are most common, although 1/4" jack connectors are also occasionally used.

Assembled audio multicore cables are found in both portable applications, where they are stored loose or on a cable drum, or are permanently installed in a building.

Cable construction

Core conductors

The vast majority of audio multicore cables consist of a number of twisted-pair copper wires, suitable for balanced audio. However, the broadcast industry tends to use audio multicores containing starquad cables, due to their increased rejection of radio-frequency interference. Some multicore cables designed for unbalanced audio are made, and they contain a number of single-core screened cables.

Core screening

The individual cables inside the multicore are usually individually screened. This reduces crosstalk between cables and also enables each cable to have a screen or ground that is isolated from other cables, significantly reducing the possibility of earth loops.

A foil-screen is typically used, comprising thin aluminium wrapped around the conductors. An uninsulated drain wire is contained inside the screen to facilitate ground connection. A less common construction is a lapped or braided screen compromising thin wires wrapped around the conductors. This is felt to give improved flexibility but less effective screening.

Core insulation

This describes the method used to isolate the screening between individual cores; two approaches are common. The first method has an extruded plastic sheath around each individual core, making the multicore appear like a number of individual audio cables bundled together inside an outer sheath. The second method dispenses with the individual sheath and typically wraps the screening with very thin plastic; in some cases this plastic is bonded to the foil sheath.

The individually sheathed construction has the advantage that individually cores can easily be terminated to individual connectors at the ends of the cable. Its disadvantage is that the size and weight of the cable are increased. When a cable without individual sheaths has to be terminated to multiple connectors, it is common practice to create individual sheaths using heat-shrinkable tubing.

Overall screen

A small number of multicore cables compromise twisted-pairs with an overall screen. These are virtually obsolete and typically only found in older broadcast installations, the use of individual screens is now virtually standard.

Some multicore cables do contain an overall braid screen in addition to the individual screens on each core. This also increases the mechanical durability of the cable.

Core identification

Different cable manufacturers use different methods of identification for the shielded pairs of cable. Belden have a sequenced color code and a number for each of the conductors in their products of up to 52 pair cables, for their plenum cables each pair is covered with their patended Belfoil shield, that is only conductive on the inner surface. For their portable cables they use a French braid. Canare, Mogami, Clark Wire & Cable and GEPCO mark numbers on the PVC insulation of the individual pairs.

Composite multicores

Composite multicores combine different types of signals in the one cable. They may contain coaxial cores for video, twisted pair for data or low voltage cores for mains power. Composite multicores are usually used to connect professional video cameras, but they are now gaining usage in live event support with the introduction of the Yamaha PM1D which uses a composite cable to connect it to the stage box.

Analog multicore

The multicore cable runs from the stage box or microphone splitter and then to the front-of-house sound desk or mixing console. Permanent installations have stage boxes mounted in the floor or side of stage and the plenum cable runs through the ceiling or false floor to the console, located either in the auditorium or the bio-box.

For temporary shows the stage box is placed at the side or rear of the stage. The stage box contains around 75% sends, and 25% returns. Both sends and returns tend to use XLRs; however, some systems use TRS A Gauge 1/4" phone connector for the returns. Returns tend to be used for foldback (on-stage monitoring) or FOH returns at line level. Larger systems can be fitted with split points integrated into the stage box, providing both an input and an isolated output on each line. In this system, the split point could be connected to the foldback desk, via another multicore. Larger shows tend to use a system with subsnakes which plug into the main stage box so one can use shorter microphone leads on stage and have less clutter.

Balanced lines

The output of most microphones is balanced to reduce the pickup of electrical noise, and therefore requires two signal wires and an earth per channel. This necessitates the use of three-pin connectors.[1] To reduce noise, the shields of each channel are often isolated from the other channels. phone jacks may be used instead of XLRs.


The end of the multicore where the channels fanout is called the tail and it generally goes at the mixing desk end. Tails used for patching may have a mixture of male and female XLRs, or TRS phone connectors on each end.

Breakout cables

An audio multicore may also function as a breakout cable, if it has a compound connector on one end and component connectors on the other. This is more common in short multicores meant for in-studio connections, such as audio engines, analog to digital converters or digital mixing consoles.[2] Multicore cables may also connect to either the front or back of patch panels, when the patch panel is used as an access point or breakout box for connecting external inputs and outputs.

Multipin multicores

The ideal system uses multipins to connect the subsnakes to the main stage box (which may be rack mounted) and multipins to the main cores. This allows the system to be expanded by channel count or length. The multipin connectors are based on the MIL C5015 standard and are made by companies like Link in Italy or Amphenol in the United States. Alternative connectors like EDAC and Burndy are also used but lack the reliability of the alloy mil-spec style connectors. Examples include;

Multicore MIL C5015 Multipin Sends/Returns
8 core 25 pole 8/0
12 core 37 pole 8/4
16 core 54 pole 12/4
24 core 85 pole 20/4

While the sound reinforcement industry generally uses proprietary multicores depending on the application, the television broadcasting industry has standardized on a 12-channel snake with a common 37-pin connector on each end known as DT-12. Only 36 pins are used and sometimes the unused pin is omitted. DT-12 snakes are commonly built into sports venues and run from where the TV truck is parked to areas such as the press box or playing field where audio is required by the TV production. The truck can then simply run a DT-12 patch snake between the truck and the house cabling, with actual XLR connectors then only being required at the very end of the snake in order to plug in microphones and other equipment.

Snake cables can be replaced by using audio over Ethernet, and similar multichannel digital audio technologies such as AES10 (MADI).

Digital multicores

Audio systems can now use digital multicore systems where the audio signal is encoded to digital using analog-to-digital converters, the channels are bundled together to be transported on a single wire to a destination then re-converted back to analog using D-to-As. Sometimes all that is run to the mix positions is control and all audio processing occurs in the Mix Box, or Stage Box.

The main problem with digital multicores is latency, the time taken to encode into digital and then back into analog at the mixing console. Most stand alone digital consoles take their inputs in analog format and the cumulative latency is too great to go unnoticed. The second problem is cost, it is currently much more expensive to use a digital multicore for small systems. Most multicore systems use Ethernet wiring as the physical medium, but the system must be as close to synchronous as possible and cannot share the same cable as data systems due to the risk of collisions.


Main article: MADI


Main article: CobraNet

The first viable Ethernet based audio multicore suffers from excessive latency and is only really being used for permanent installs. It is acceptable for the sound to the lobby to be delayed from the FOH as you cannot hear the direct sound from stage. CobraNet cards are available for Yamaha digital consoles.


Main article: EtherSound

The most recent Ethernet based system is rapidly gaining acceptance for live sound because of its low latency. Ethersound cards are available for Yamaha and Studer digital consoles but the slots in Yamaha desks are limited to 16 inputs and outputs. When digital consoles come fitted with EtherSound, digital multicores will gain widespread acceptance.

Roland RSS Digital Snake

Roland Corporation RSS Digital Snake is a 40-channel digital audio transmission system using one standard CAT 5e cable. It features high quality remote controllable microphone preamps, configurable inputs and outputs and immunity to RF and electrical interference. A remote control unit allows users to easily adjust input gain and also features “scene” recall of preamp settings including level and phantom power status. The system offers built-in cable redundancy, automatically switching to a backup cable should the main cable be compromised. The system inputs can be “split” using approved Ethernet fast switching hubs providing for multiple “transformerless” audio feeds to monitor consoles, recording devices, and broadcast facilities.


Main article: Dante (networking)

Dante is now being implemented on a number of digital consoles, including Allen and Heath Ilive, Quoted latency for Dante is claimed to be in the microseconds.


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.