World Library  
Flag as Inappropriate
Email this Article


Tank, Heavy, TOG I
Type super-heavy tank
Place of origin United Kingdom
Production history
Manufacturer William Foster and Co. Ltd.
Number built 1
Specifications (as built)
Weight 80 long tons (90 short tons; 81 t)
Length 10.1 m (33 ft 2 in)
Width 3.1 m (10 ft 2 in)
Height 3 m (9 ft 10 in)
Crew 8 (commander, gunner, loader, driver, 4x sponson gunners)

Armour 62 mm (2.4 in)
75 mm (2.95 inch) howitzer[1]
QF 2 pdr
Engine Paxman-Ricardo diesel 12TP driving English Electric generator
600 hp [2]
Transmission 2 English Electric motors
Suspension unsprung
Speed 14 km/h (8.7 mph)

The Tank, Heavy, TOG 1 was a prototype British heavy tank produced in the early part of the Second World War in the expectation that battlefields might end up like those of the First World War and was designed so it could cross churned-up countryside and trenches. A single prototype was built, and followed by an improved model (the TOG 2) but interest faded with the successful performance of another cross-country design, the Churchill tank, and the mobile war that was being fought.


  • History 1
  • See also 2
  • References 3
  • External links 4


In July 1939 the Special Vehicle Development Committee was drawn up for future tank designs suitable for Great War conditions under Sir Albert Gerald Stern; who had been on the original Landships Committee and head of the Tank Supply Depot during World War I. The committee included others who had been instrumental in the development of the tank during the Great War: former Director of Naval Construction, Sir Eustace Tennyson d'Eyncourt, General (retired) Sir Ernest Swinton, engine designer Harry Ricardo, the gearbox and transmission expert Major Walter Gordon Wilson. Unsurprisingly they got the nickname "The Old Gang" and the initials TOG were applied to their designs.

Together they proposed the development of a heavy tank design, which they entrusted to another of the first tank's developers and builder of the first tank, Sir William Tritton of Foster's of Lincoln.

Their specification was comprehensive. As well as being able to operate across ground broken up by shelling and waterlogged, it was expected to resist 47-mm anti-tank guns and 105-mm field guns or howitzers at 100 yd (91 m). Main armament would be a field gun mounted in the front - effective against 7 ft (2.1 m) thick reinforced concrete - and two 2-pounder guns, the latter in sponsons. For use against infantry there would be a Besa machine guns covering "all arcs" - one firing forward, one in each sponson, and one firing to the rear. To provide cover four 2-inch smoke mortars were included.[1][3]

Design work by Fosters began in December 1939 producing a wooden mock-up. Designed with trench crossing abilities to the fore and the capability to carry infantry as well, the design as built was a large hull with side doors supported on broad tracks, with a 2-pdr gun armed Matilda II infantry tank turret. The front plate of the hull carried the 75 mm gun and mounting as used on French Char B tank.[4]

It was realised that running the track drive over the top of the hull was not necessary and work began on a follow-up design in June 1940. The prototype TOG I was delivered in October 1940. Due to the weight, electrical drive was used - the engine driving two generators connected to an electrical motor for each track. The steering wheel was connected to a potentiometer that varied the voltage to the track motors. This strained the drive and track and after these problems with the electro-mechanical drive, it was converted to a hydraulic drive designed by Fluidrive Engineering, a process that took until May 1943 after which it was called TOG 1A. The fluid drive was not satisfactory either.[1] The prototype was sent to Chobham and then seems to have disappeared into history.

See also


  1. ^ a b c Chamberlain & Ellis (1969) p 78
  2. ^ Website Paxman History Pages - Paxman's World War Two Tank Propellant
  3. ^ White, p66
  4. ^ Chamberlain and Ellis p78
  • White BT, British Tanks 1915-1945 Ian Allen Publishing, London
  • David Fletcher The Great Tank Scandal - British Armour in the Second World War, Part 1 HMSO (1989) ISBN 0 11 290460 2.
  • Chamberlain, P; Ellis, C British and American Tanks of World War II 1969. Arco Publishing

External links

  • Great Britain's Heavy Tanks archive link
  • Tank, Heavy, TOG 1
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.