World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0002536205
Reproduction Date:

Title: Vise  
Author: World Heritage Encyclopedia
Language: English
Subject: Screw (simple machine), Workbench (woodworking), Woodworking, List of 3DO Interactive Multiplayer games, Edge jointing
Collection: Metalworking Hand Tools, Woodworking Clamps
Publisher: World Heritage Encyclopedia


Three types of vises

A vise or vice (see spelling discussion) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.

Light duty homeowner's vise holding a brass check valve.


  • Types 1
    • Woodworking 1.1
    • Engineer's 1.2
    • Machine 1.3
    • Vacuum 1.4
    • Pipe 1.5
    • Clamp-on 1.6
    • Combination 1.7
    • Others 1.8
    • Misuse 1.9
  • See also 2
  • References 3
    • Notes 3.1
    • Citations 3.2



Woodworker's vise with entirely wooden jaws

Woodworking vises are attached to a workbench, typically flush with its work surface. Their jaws are made of wood or metal, the latter usually faced with wood, called cheeks, to avoid marring the work.[1] The movable jaw may include a retractable dog to hold work against a bench dog.

"Quick-release" vises employ a split nut that allows the screw to engage or disengage with a half-turn of the handle. When disengaged the movable jaw may be moved in or out throughout its entire range of motion, vastly speeding up the process of adjustment. Common thread types are Acme and buttress.

Traditional workbench vises are commonly either face vises, attached to the front of the workbench, near the left end (for a right-handed worker) or end vises, attached to or forming part of the right end of the bench.

One common variety of face vise is the leg vise, which has a long extension down to the floor, with a provision to adjust the spacing of the bottom of the leg, to keep the clamping surfaces of the jaws approximately parallel, even though the work to be clamped may be of various thicknesses.


Engineer's bench vise made of cast iron - image inset shows soft jaws
A small machine vise used in a drill press
A machine vise that can be rotated

An engineer's vise, also known as a metalworking vise or machinist's vise, is used to clamp metal instead of wood. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron. However, most heavy duty vises are 55,000 psi cast steel or 65,000 psi ductile iron. Some vises have a cast iron body but a steel channel bar. Cast iron is popular because it is typically 30 ksi grey iron which is rigid, strong and inexpensive. The jaws are often separate and replaceable, usually engraved with serrated or diamond teeth. Soft jaw covers made of aluminum, copper, wood (for woodworking) or plastic may be used to protect delicate work. The jaw opening of an engineer's vise is almost always the same size as the jaw width, if not bigger.

An engineer's vise is bolted onto the top surface of a workbench,[2] with the face of the fixed jaws just forward of its front edge. The vise may include other features such as a small anvil on the back of its body. Most engineer's vises have a swivel base. Some engineer's vises marketed as "Homeowner Grade" are not made of steel or cast iron, but of pot metal or a very low grade of iron, typically with a tensile strength of under 10 ksi. Most homeowner's bench vises have an exposed screw.

Aluminum soft jaw shown holding five parts at a time in a CNC milling machine.


Machine vises are mounted on drill presses, grinding machines and milling machines. Abrasive chop saws have a special type of machine vise built in to the saw. Some hobbyists use a machine vise as a bench vise because of the low cost and small size.


A vacuum vise is a hobbyist's tool, commonly used to hold circuit boards, model airplanes and other small work. They are mounted with a suction cup and often have an articulated joint in the middle to allow the vise to pivot and swivel. Jewelers also use vacuum vises to hold jewelry.


Pipe vises are a plumber's tool, often used to hold pipes in place for threading and cutting. There are two main styles: chain and yoke. The yoke type vise uses a screw to clamp down the pipe, and the chain style uses a chain for securing the pipe.

Heavy duty metalworking vise showing some cosmetic distress and a missing mounting bolt


Clamp-on vises are basically very light-duty bench vises. They usually have smooth jaws for wood, plastic and light metalworking, but some have serrated jaws for getting a better grip on metal. Some unique vises combine these features in a rotating design.


Vises that combine the functions of a pipe vise with a metalworker's vise do exist, and are quite common. Some vises have a rotating design to provide both bench and pipe jaws. These are often used by plumbers.


Other kinds of vise include:

  • Hand vises
  • compound slide vises are more complex machine vises. They allow speed and precision in the placement of the work.
  • Cross vises, which can be adjusted using leadscrews in the X and Y axes; these are useful if many holes need to be drilled in the same workpiece using a drill press. Compare router table.
  • Off-center vises
  • Angle vises
  • Sine vises, which use gauge blocks to set up a highly accurate angle
  • Rotary vises
  • Diemakers' vise
  • Saw vices – used for sharpening hand saws
  • Pin vises (for holding thin, long cylindrical objects by one end, or used as a drill (scale modeler's pin vise))
  • Jewellers' vises and by contrast
  • Leg vises, which are attached to a bench but also supported from the ground so as to be stable under the very heavy use imposed by a blacksmith's work
  • Shaker broom vise


A vise is sometimes misused as a makeshift press. Sometimes people will extend the handle with a cheater bar or hit it with a hammer. This typically will void the warranty of the vise and possibly destroy it. Most professionals (e.g., engineers, machinists, fabricators, mechanics) do not misuse vises, but inexperienced people (e.g., students, do-it-yourselfers) sometimes misuse vises, destroying them.

See also




  1. ^ Bentzley, Craig (2011). "Installing a Bench Vise" (PDF). Woodcraft Magazine (June/July): 50–53. 
  2. ^ Haan, E. R. (October 1954), "Selecting and using a bench vise",  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.