World Library  
Flag as Inappropriate
Email this Article

Woodworking joints

Article Id: WHEBN0000113266
Reproduction Date:

Title: Woodworking joints  
Author: World Heritage Encyclopedia
Language: English
Subject: Woodworking, Router (woodworking), Butt joint, Butterfly joint, Groove (joinery)
Collection: Joinery, Timber Framing, Woodworking
Publisher: World Heritage Encyclopedia

Woodworking joints

A worker uses a mortising machine to shape timber framing joints

Joinery is a part of woodworking that involves joining together pieces of wood, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. The characteristics of wooden joints - strength, flexibility, toughness,appearance, etc. - derive from the properties of the joining materials and from how they are used in the joints. Therefore, different joinery techniques are used to meet differing requirements. For example, the joinery used to build a house is different from that used to make puzzle toys, although some concepts overlap.


  • List of joints 1
    • Traditional woodworking joints 1.1
    • Nontraditional woodworking joints 1.2
    • Traditional ways of improving joints 1.3
    • Nontraditional ways of improving joints 1.4
  • Properties of wood 2
    • Strength 2.1
    • Dimensional stability 2.2
  • Materials used for joining 3
  • Traditional joinery 4
  • Nontraditional joinery 5
  • See also 6
  • Footnotes 7
  • References 8
  • External links 9

List of joints

A worker uses a large circular saw to cut joints.

Traditional woodworking joints

Joint joint Description
Bridle joint
Also known as open tenon, open mortise and tenon, or tongue and fork joints, this joint is where the through mortise is open on one side and forms a fork shape. The mate has a through tenon or necked joint. Bridle joints are commonly used to join rafter tops, also used in scarf joints and sometimes sill corner joints in timber framing.
Butt joint
The end of a piece of wood is butted against another piece of wood. This is the simplest and weakest joint.
Miter joint
Similar to a butt joint, but both pieces have been bevelled (usually at a 45 degree angle).
Finger joint
A corner joint with interlocking fingers. Receives pressure from two directions.
Dovetail joint
A form of box joint where the fingers are locked together by diagonal cuts. More secure than a finger joint.
Dado joint
Also called a housing joint or trench joint, a slot is cut across the grain in one piece for another piece to set into; shelves on a bookshelf having slots cut into the sides of the shelf, for example.
Groove joint
Like the dado joint, except that the slot is cut with the grain.
Tongue and groove
Each piece has a groove cut all along one edge, and a thin, deep ridge (the tongue) on the opposite edge. If the tongue is unattached, it is considered a spline joint.
Mortise and tenon
A stub (the tenon) will fit tightly into a hole cut for it (the mortise). This is a hallmark of MissionStyle furniture, and also the traditional method of jointing frame and panel members in doors, windows, and cabinets. This joint is a good strong joint to use.
Birdsmouth joint
Also called a bird's beak cut, this joint used in roof construction. A V-shaped cut in the rafter connects the rafter to the wall-plate.[1]
Halved joint
A joint in which the two members are joined by removing material from each at the point of intersection so that they overlap.
Splice joint
A joint used to attach two members end to end.

Nontraditional woodworking joints

Joint Image Description
Pocket hole joinery
A hidden screw is driven into the joint at an angle.
Metal connectors Joints using metal connectors that attach to the frame with nails or screws.
Floating tenon joint See Mortise and tenon
stitch and glue

Traditional ways of improving joints

A doweled joint
  • Dowel: A small rod is used internal to a joint both to help align and to strengthen the joint. Traditional joints are used with natural timbers as they do not need any other materials other than the timber itself. for example: Butt joints. Dowel joints are also useful for pegging together weaker, cheaper composite materials such as laminate-faced chipboard, and where limited woodworking tools are available (since only simple drilled holes are needed to take the dowels).

Nontraditional ways of improving joints

  • Biscuit joints: A small 'biscuit' is used to help align an edge or butt joint when gluing.
  • Domino joiner: A trademarked tool similar to a biscuit joiner, where a piece larger than a biscuit has some of the advantages of dowels, and some of the advantages of biscuits.

Properties of wood

Many wood joinery techniques either depend upon or compensate for the fact that wood is anisotropic: its material properties are different along different dimensions.

This must be taken into account when joining wood parts together, otherwise the joint is destined to fail. Gluing boards with the grain running perpendicular to each other is often the reason for split boards, or broken joints. Furniture from the 18th century, while made by master craftsmen, did not take this into account. The result is this masterful work suffers from broken bracket feet, which was often attached with a glue block which ran perpendicular to the base pieces. The glue blocks were fastened with both glue and nails, resulting in unequal expansion and contraction between the pieces. This was also the cause of splitting of wide boards, which were commonly used during that period.

In modern woodworking it is even more critical, as heating and air conditioning cause major changes in the moisture content of the wood. All woodworking joints must take these changes into account, and allow for the resulting movement.[2]


Wood is stronger when stressed along the grain (longitudinally) than it is when stressed across the grain (radially and tangentially). Wood is a natural composite material; parallel strands of cellulose fibers are held together by a lignin binder. These long chains of fibers make the wood exceptionally strong by resisting stress and spreading the load over the length of the board. Furthermore, cellulose is tougher than lignin, a fact demonstrated by the relative ease with which wood can be split along the grain compared to across it.

Different species of wood have different strength levels, and the exact strength may vary from sample to sample.

Dimensional stability

Timber expands and contracts in response to humidity, usually much less so longitudinally than in the radial and tangential directions. As tracheophytes, trees have lignified tissues which transport resources such as water, minerals and photosynthetic products up and down the plant. While lumber from a harvested tree is no longer alive, these tissues still absorb and expel water causing swelling and shrinkage of the wood in kind with change in humidity.[3] When the dimensional stability of the wood is paramount, quarter-sawn or rift-sawn lumber is preferred because its grain pattern is consistent and thus reacts less to humidity.

Materials used for joining

Metal plates are often incorporated into the design where the timber alone would not be strong enough for a given load.
Pin-connected post and beam house framing
  • Joints can be designed to hold without the use of glue or fasteners; a pinned mortise and tenon is an example of this.
  • Glue is highly effective for joining timber when both surfaces of the joint are edge grain. A properly glued joint may be as strong or stronger than a single piece of wood. However, glue is notably less effective on end-grain surfaces. Animal glue is soluble in water, producing joints that can be disassembled using steam to soften the glue.
  • Various mechanical fasteners may be used, the simplest being nails and screws. Glue and fasteners can be used together.

Traditional joinery

Many traditional wood joinery techniques use the distinctive material properties of wood, often without resorting to mechanical fasteners or adhesives. While every culture in which pieces of wood are joined together to make furniture or structures has a joinery tradition, wood joinery techniques have been especially well documented and celebrated in the Indian, Chinese, European, and Japanese traditions. Because of the actual physical existence of Indian and Egyptian examples, we know that furniture from the first several dynasties show the use of complex joints, like the Dovetail, over 5 thousand years ago. This tradition continued to other later Western styles. While Western techniques focused on concealment of joinery, the Eastern societies, though later, did not attempt to "hide" their joints. The Japanese and Chinese traditions in particular required the use of hundreds of types of joints. The reason was that nails and glues used did not stand up well to the vastly fluctuating temperatures and humid weather conditions in most of Central and South-East Asia.[4] As well, the highly resinous woods used in traditional Chinese furniture do not glue well, even if they are pre-cleaned with solvents and attached using modern glues.

Nontraditional joinery

Methods that are not considered traditional joinery have come about in modern times, largely to attempt to simplify the job of the woodworker for various reasons. These include biscuit joints and pocket hole joinery.

See also


  1. ^
  2. ^ Pro Woodworking
  3. ^ Wood Movement,
  4. ^ Huntley, Michael (20 January 2009), "Michael Huntley demystifies the furniture making techniques of Chinese craftsmen prior to 1900", Wood Worker's Institute (GMC Publications) 


  • Lee A. Jesberger (2007). Woodworking Terms and Joints. Pro Woodworking
  • Bernard Jones (Ed.) (1980). The Complete Woodworker. ISBN 0-89815-022-1
  • Peter Korn (1993). Working with Wood. ISBN 1-56158-041-4
  • Sam Allen (1990). Wood Joiner's Handbook. Sterling Publishing. ISBN 0-8069-6999-7
  • Wolfram Graubner (1992). Encyclopedia of Wood Joints. Taunton Press. ISBN 1-56158-004-X
  • US Forestry Service (1985) Water Repellency and Dimensional Stability of Wood

External links

  • Pro Woodworking Tips - Woodworking
  • British Woodworking Federation - not for profit woodworking body advice on joinery in the UK
Terms and Joints
  • Dimensioning woodworking and carpentry joints Craftsmanspace
  • List of French timber framing joints, in French language
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.