World Library  
Flag as Inappropriate
Email this Article

Capacitive sensing

Article Id: WHEBN0018946305
Reproduction Date:

Title: Capacitive sensing  
Author: World Heritage Encyclopedia
Language: English
Subject: Nokia C6-01, Sony SmartWatch, Nokia 500, Nokia E7-00, Nokia C7-00
Publisher: World Heritage Encyclopedia

Capacitive sensing

In electrical engineering, capacitive sensing is a technology, based on capacitive coupling, that takes human body capacitance as input. Capacitive sensors detect anything that is conductive or has a dielectric different from that of air.

Many types of sensors use capacitive sensing, including sensors to detect and measure proximity, position or displacement, humidity, fluid level, and acceleration. Human interface devices based on capacitive sensing, such as trackpads,[1] can replace the computer mouse. Digital audio players, mobile phones, and tablet computers use capacitive sensing touchscreens as input devices.[2] Capacitive sensors can also replace mechanical buttons. There is also a musical instrument, the theremin, that uses capacitive sensing to allow a human player to control volume and pitch without physically touching the instrument.


Capacitive sensors are constructed from many different media, such as copper, Indium tin oxide (ITO) and printed ink. Copper capacitive sensors can be implemented on standard FR4 PCBs as well as on flexible material. ITO allows the capacitive sensor to be up to 90% transparent (for one layer solutions, such as touch phone screens). Size and spacing of the capacitive sensor are both very important to the sensor's performance. In addition to the size of the sensor, and its spacing relative to the ground plane, the type of ground plane used is very important. Since the parasitic capacitance of the sensor is related to the electric field's (e-field) path to ground, it is important to choose a ground plane that limits the concentration of e-field lines with no conductive object present.

Designing a capacitance sensing system requires first picking the type of sensing material (FR4, Flex, ITO, etc.). One also needs to understand the environment the device will operate in, such as the full operating temperature range, what radio frequencies are present and how the user will interact with the interface.

There are two types of capacitive sensing system: mutual capacitance,[3] where the object (finger, conductive stylus) alters the mutual coupling between row and column electrodes, which are scanned sequentially;[4] and self- or absolute capacitance where the object (such as a finger) loads the sensor or increases the parasitic capacitance to ground. In both cases, the difference of a preceding absolute position from the present absolute position yields the relative motion of the object or finger during that time. The technologies are elaborated in the following section.

Surface capacitance

In this basic technology, only one side of the insulator is coated with conductive material. A small voltage is applied to this layer, resulting in a uniform electrostatic field.[5] When a conductor, such as a human finger, touches the uncoated surface, a capacitor is dynamically formed. Because of the sheet resistance of the surface, each corner is measured to have a different effective capacitance. The sensor's controller can determine the location of the touch indirectly from the change in the capacitance as measured from the four corners of the panel: the larger the change in capacitance, the closer the touch is to that corner. With no moving parts, it is moderately durable, but has low resolution, is prone to false signals from parasitic capacitive coupling, and needs calibration during manufacture. Therefore, it is most often used in simple applications such as industrial controls and interactive kiosks.[6]

Projected capacitance

Projected capacitive touch (PCT) technology is a capacitive technology which allows more accurate and flexible operation, by etching the conductive layer. An X-Y grid is formed either by etching one layer to form a grid pattern of electrodes, or by etching two separate, perpendicular layers of conductive material with parallel lines or tracks to form the grid; comparable to the pixel grid found in many liquid crystal displays (LCD).[7]

The greater resolution of PCT allows operation with no direct contact, such that the conducting layers can be coated with further protective insulating layers, and operate even under screen protectors, or behind weather and vandal-proof glass. Because the top layer of a PCT is glass, PCT is a more robust solution versus resistive touch technology. Depending on the implementation, an active or passive stylus can be used instead of or in addition to a finger. This is common with point of sale devices that require signature capture. Gloved fingers may or may not be sensed, depending on the implementation and gain settings. Conductive smudges and similar interference on the panel surface can interfere with the performance. Such conductive smudges come mostly from sticky or sweaty finger tips, especially in high humidity environments. Collected dust, which adheres to the screen because of moisture from fingertips can also be a problem.

There are two types of PCT: self capacitance, and mutual capacitance.

Mutual capacitive sensors have a capacitor at each intersection of each row and each column. A 12-by-16 array, for example, would have 192 independent capacitors. A voltage is applied to the rows or columns. Bringing a finger or conductive stylus near the surface of the sensor changes the local electric field which reduces the mutual capacitance. The capacitance change at every individual point on the grid can be measured to accurately determine the touch location by measuring the voltage in the other axis. Mutual capacitance allows multi-touch operation where multiple fingers, palms or styli can be accurately tracked at the same time.

Self-capacitance sensors can have the same X-Y grid as mutual capacitance sensors, but the columns and rows operate independently. With self-capacitance, current senses the capacitive load of a finger on each column or row. This produces a stronger signal than mutual capacitance sensing, but it is unable to resolve accurately more than one finger, which results in "ghosting", or misplaced location sensing.

Circuit design

Capacitance is typically measured indirectly, by using it to control the frequency of an oscillator, or to vary the level of coupling (or attenuation) of an AC signal.

The design of a simple capacitance meter is often based on a relaxation oscillator. The capacitance to be sensed forms a portion of the oscillator's RC circuit or LC circuit. Basically the technique works by charging the unknown capacitance with a known current. (The equation of state for a capacitor is i = C dv/dt. This means that the capacitance equals the current divided by the rate of change of voltage across the capacitor.) The capacitance can be calculated by measuring the charging time required to reach the threshold voltage (of the relaxation oscillator), or equivalently, by measuring the oscillator's frequency. Both of these are proportional to the RC (or LC) time constant of the oscillator circuit.

The primary source of error in capacitance measurements is stray capacitance, which if not guarded against, may fluctuate between roughly 10 pF and 10 nF. The stray capacitance can be held relatively constant by shielding the (high impedance) capacitance signal and then connecting the shield to (a low impedance) ground reference. Also, to minimize the unwanted effects of stray capacitance, it is good practice to locate the sensing electronics as near the sensor electrodes as possible.

Another measurement technique is to apply a fixed-frequency AC-voltage signal across a capacitive divider. This consists of two capacitors in series, one of a known value and the other of an unknown value. An output signal is then taken from across one of the capacitors. The value of the unknown capacitor can be found from the ratio of capacitances, which equals the ratio of the output/input signal amplitudes, as could be measured by an AC voltmeter. More accurate instruments may use a capacitance bridge configuration, similar to a wheatstone bridge.[8] The capacitance bridge helps to compensate for any variability that may exist in the applied signal.

Comparison with other touchscreen technologies

Capacitive touchscreens are more responsive than resistive touchscreens, but less accurate.[9]

A standard stylus cannot be used for capacitive sensing, but special capacitive styli, which are conductive, exist for the purpose. One can even make a capacitive stylus by putting some form of conductive material, such as anti-static conductive foam on the tip of a standard stylus.[10] Capacitive touchscreens are more expensive to manufacture than resistive touchscreens. Some cannot be used with gloves, and can fail to sense correctly with even a small amount of water on the screen.

Power supplies with a high level electronic noise can reduce accuracy.


Capacitive Stylus

A stylus designed for resistive touchscreens will not register on capacitive sensors. Styli that work on capacitive touchscreens primarily designed for fingers are required to simulate the difference in dielectric offered by a human digit.[11]

According to a report by ABI Research, styli are especially needed in China for handwriting recognition because of the nature of its writing system.[12]

See also


  1. ^ Larry K. Baxter (1996). Capacitive Sensors. John Wiley and Sons. p. 138.  
  2. ^ Wilson, Tracy. """HowStuffWorks "Multi-touch Systems. Retrieved August 9, 2009. 
  3. ^ US Pat No 5,305,017 5,861,875
  4. ^ e.g. U.S. Pat. No. 4,736,191
  5. ^ "Capacitive Sensor Operation and Optimization". Retrieved 2012-06-15. 
  6. ^ "Please Touch! Explore The Evolving World Of Touchscreen Technology". Retrieved 2009-09-02. 
  7. ^ "Capacitive Touch (Touch Sensing Technologies — Part 2)". Retrieved 2011-20-2011. 
  8. ^ "Basic impedance measurement techniques". Retrieved 2012-06-15. 
  9. ^ Doku, Ernest. "Resistive Vs. Capacitive Touchscreens, What's The Difference?". Retrieved March 31, 2010. 
  10. ^ "How To Make A Free Capacitive Stylus". Pocketnow. 2010-02-24. Retrieved 2012-06-15. 
  11. ^ J.D. Biersdorfer (2009-08-19). "Q&A: Can a Stylus Work on an iPhone?". Retrieved 2012-06-15. 
  12. ^ Motorola il iDEN (2008-12-15). "ABI Research: Capacitive touchscreens not the wave of the future for most mobile phones". Retrieved 2012-06-15. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Hawaii eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.